We Say
Pre-washing is one of the most important stages in safe vehicle cleaning, as it removes loose dirt and traffic film before any contact wash takes place. The more contamination you remove at this stage, the lower the risk of introducing swirl marks during washing.
ValetPRO Snow Foam Combo 2 is alkaline based foam, designed to maximise that pre-wash stage by producing thick, clinging foam that dwells on the surface and helps loosen contamination. The foam structure slows runoff, allowing the surfactants within the formula to break down road grime more effectively.
Used through a foam lance, the product spreads evenly across the vehicle and begins lifting dirt away from the paint before rinsing. This reduces the amount of contamination remaining for the contact wash stage.
In our experience, Snow Foam Combo 2 works best when paired with a quality foam lance. Used regularly as part of your wash routine, it’s a simple way to reduce wash-induced marring and keep paintwork in better condition over time.
Key Features
Foaming 9/10 (Dense foam)
Cleaning 8/10 (Pre-wash)
Application Foam lance (Pressure washer)
Description
ValetPRO Snow Foam Combo 2 is a high-foaming pre-wash designed to loosen dirt, traffic film and road grime before the contact wash stage.
Applied through a foam lance, the product creates thick foam that clings to the vehicle surface. This extended dwell time allows the cleaning agents to begin breaking down contamination before rinsing.
Typical benefits:
✓ Thick clinging foam for longer dwell time
✓ Helps loosen dirt before contact washing
✓ Reduces the risk of wash-induced marring
✓ Ideal first step in a safe wash process
For best results, follow the pre-wash stage with a suitable shampoo from the car wash shampoo range before drying with a towel from the vehicle drying towel collection.
Specification
| Product Type | Snow foam pre-wash |
|---|---|
| Application Method | Foam lance |
| Foam Structure | Dense clinging foam |
| Primary Function | Pre-wash cleaning |
| Surface Compatibility | Paint, trim, wheels |
| Use Stage | Pre-wash stage |
How To Use
1) Dilute in foam lance:
Add the recommended amount of Snow Foam Combo 2 to a foam cannon and dilute with water.
2) Apply foam:
Spray the foam evenly across the entire vehicle surface.
3) Allow dwell time:
Leave the foam to dwell for several minutes to loosen dirt.
4) Rinse thoroughly:
Rinse the vehicle with clean water before moving on to the contact wash stage.
Notes:
✓ Do not allow the foam to dry on the surface
✓ Apply to a cool vehicle out of direct sunlight
✓ Follow with a contact wash for best results
Safety Data
For detailed safety, handling and ingredient information for ValetPRO Snow Foam Combo 2, please refer to the official Safety Data Sheet: