RUPES Mille Fine Gel Compound is the perfect product to use in situations where a combination of light cutting and strong burnishing abilities are required for paint enhancement duties when using gear-driven dual action polishers. Formulated specifically for use with the RUPES LK 900E BigFoot Mille and the RUPES Mille Fine Foam Polishing Pad, it offers a number of subtle benefits over rival finishing polishes. Firstly, it removes light defects and produces a stunning high gloss finish without prematurely breaking down. Secondly, it does this without drying out too quickly or generating any polishing dust. Thirdly, it buffs off cleanly and leaves paint feeling incredibly smooth, which makes it a pleasure to use.
Cut Level3/10(Compared To Others)
Filling Power0/10(Compared To Others)
Gloss Level10/10(Compared To Others)
RUPES Mille Fine Gel Compound is a mildly abrasive water-based polish designed to be used in conjunction with short-throw gear-driven dual action polishers. It works by using precision-milled aluminium oxide particles to cut away a very thin layer of paint and burnish the newly exposed surface. As a result, it removes faint swirl marks, machine holograms and wash marring from all paint types quickly and easily, and produces an ultra-sharp high gloss finish ready for the addition of protection. Specially formulated lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.
|Contains Abrasive Particles||Yes (diminishing)|
|Contains Fillers And Glazing Oils||No|
|Suitable For Hand Use||No|
|Suitable For Hard Paints||Yes|
|Suitable For Intermediate Paints||Yes|
|Suitable For Machine Use||Yes|
|Suitable For Soft Paints||Yes|
How To Use
RUPES Mille Fine Gel Compound should only be applied using the RUPES LK 900E BigFoot Mille or other gear-driven dual action polishers. For best results, it should be applied to freshly decontaminated paint using either a RUPES Mille Fine Foam Polishing Pad or a RUPES BigFoot Medium Wool Polishing Pad. Only 3-4 pea-sized drops of product are required per 18 x 18 area, and these should be worked in thoroughly at 400-500 revolutions per minute (speed 4-5 on most gear-driven dual action polishers) until only a hint of residue remains. This residue should then be buffed off carefully using a PB Super Buffing Towel.