We Say
Refined ergonomics, a progressive throttle and useful kit options make the LH 19E a serious choice for skilled rotary correction.
The RUPES LH 19E BIGFOOT is designed for detailers who spend plenty of time with a rotary polisher in their hands. Its compact housing, stated 2.2kg weight and high-torque motor are intended to offer strong paint-correction capability without making the machine unnecessarily cumbersome.
What stands out is the handling. The progressive trigger acts like a throttle, allowing the operator to adjust speed within the selected range while working. The supplied loop handle is designed to help absorb vibration and improve grip, particularly during demanding polishing passes.
This product is offered in several configurations, from a standard machine with backing plate and loop handle to kits with compounds, pads and accessories. The exact contents therefore depend on the variant selected, and should not be assumed to be the same for every order.
The LH 19E is a true rotary polisher, not a 15mm-orbit dual-action machine. This is a machine for controlled, direct rotary cutting and finishing in capable hands.
Key Features
Motor1200W(High-torque rotary)
Speed Range450–1700(No-load rpm)
Variants3 OPTIONS(Standard, STN & DLX)
Description
The RUPES LH 19E BIGFOOT is a professional rotary machine polisher with a progressive trigger and vibration-conscious handle design.
Choose the standard machine or one of the optional polishing kits. Kit contents vary by selected SKU, so refer to the appropriate package breakdown before ordering.
Why you'll love it:
✓ 1200W motor
✓ 450–1700 rpm stated operating range
✓ Progressive trigger for precise speed control
✓ Compact 2.2kg housing
✓ Loop handle included in supplied kit configurations
✓ 125mm backing plate included in listed configurations
✓ Choice of standard, STN and DLX kit variants
✓ Rotary drive, not a random-orbit polisher
Specification
| Drive Type | Rotary |
|---|---|
| Power Input | 1200W |
| Speed Range | 450–1700 rpm |
| Backing Plate | 125mm |
| Weight | 2.2kg |
| Cable Length | 9m (listed configuration) |
| Variant Options | Standard / STN / DLX |
How To Use
1) Prepare the paintwork:
Wash, decontaminate and dry the vehicle. Inspect the paint and protect sensitive trims and edges as required.
2) Select the right accessories:
Fit a compatible backing plate and pad, then choose a compound or polish suitable for the paint condition. Check the manufacturer's instructions and any kit-specific contents.
3) Start at a controlled speed:
Apply a modest amount of polish to the pad. Begin at low speed to spread the product, with the pad positioned carefully on the panel.
4) Work in manageable sections:
Keep the pad moving evenly with controlled pressure. Monitor paint temperature, pad condition and product residue, especially near edges and raised body lines.
5) Inspect and refine:
Wipe away residue with a clean microfibre cloth and check the result under suitable lighting. Repeat or refine with a less aggressive combination if necessary.
Important Notes:
✓ Rotary machines use direct pad rotation and require suitable technique
✓ Always use the appropriate backing plate, pad and polish combination
✓ Monitor heat and avoid lingering over edges or sensitive paint
✓ Disconnect mains machines or remove batteries before accessory changes
✓ Follow the manufacturer's operating and safety instructions
Product Information
This is an electrical machine polisher, not a chemical preparation. It does not require a chemical Safety Data Sheet for the machine itself.
Standard SKU LH19E/STD includes machine, 125mm backing plate and loop handle. STN and DLX kits include additional polishing products and accessories as listed for the selected variant. This machine uses direct rotary motion, not a 15mm random orbit.
Read the supplied manufacturer instruction manual before use. Follow electrical and battery safety guidance, as applicable, and check the safety information for any polishes or compounds used with the machine.