Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*
Rupes DA Coarse Pads Blue

Rupes DA Coarse Pads Blue

by RUPES
£5.00




We Say

The Rupes DA coarse pad is the heaviest of the Rupes DA foam range of pads, designed to be used with random orbital and gear driven machines. When paired with Rupes DA Coarse Compound will remove heavy defects from even hard paints in a quick and efficient manner.

Key Features

cut level 9/10 (compared to others)
flexibilty 2/10 (compared to others)
washable yes (by hand)

Description

The DA COARSE foam pad is specially designed to be used with both random orbital and gear-driven tools. The unique open-cell all new foam material removes mild to severe defects from most paint systems. When paired with RUPES DA-COARSE compound provides improved cutting and finishing ability.

This new pad combines the best aspects of the previous blue and green foams, with an increased durability and a more vibrant blue color.

Available in 5 sizes:

40mm to suit 25mm/1" backing plates

70mm to suit 50mm/2" backing plates

100mm to suit 75mm/3" backing plates

150mm to suit 125mm/5" backing plates

180mm to suit 150mm/6" backing plates

Specification

More Information
COMPATIBLE BACKING PLATE 25mm,50mm,75mm,125mm and 150mm
CONSTRUCTION FOAM
cut level
9
flexibility
2
FOAM STRUCTURE open CELL
SUITABLE FOR HARD PAINTS YES
SUITABLE FOR INTERMEDIATE PAINTS YES
SUITABLE FOR SOFT PAINTS YES
WASHABLE YES (HAND ONLY)

How To Use

General usage notes:

(i)Always select the least aggressive pad you think you will need to achieve the desired result, and step up one grade at a time if more cut is required.
(ii)Always ensure that you centre each pad properly on the backing plate (this can take several attempts to get right, but is vital if the machine is to remain perfectly balanced during use).
(iii)Always use an appropriate sized pad for the backing plate you are using (the pad should always protrude past the edge of the backing plate, never the other way around).
(iv)Always prime a new pad by loading it with 2-6 pea-sized drops of product (depending on pad size) and running it stationary on the paint for 30 seconds at speed 1.
(v)Always ensure that spent polish residue on the face of the pad is brushed off regularly during use using a RUPES BigFoot Claw Pad Tool (failure to follow this advice can lead to micromarring of the finish.
(vi)After use, clean the pads with warm water and mild soap(using your fingertips to massage out any remaining polish residue), rinse with running water and allow to dry naturally.
(vii) While not in use, store in a dry, dust-free environment (lidded plastic storage boxes are ideal in this respect).

Tips for succes:

Clean pads frequently during use with compressed air, a vacuum or a Rupes Claw Pad Tool to maintain consistent performance.

Do not over-saturate the pad with compound. Too much compound can lead to diminished performance.

Avoid the use of solvent based compounds and cleaners to prevent damage to the foam cell structure.

Reviews