Nanolex Textile & Leather Sealant is an easy to use nanotechnology coating that lays down a semi-permanent, invisible and fully breathable barrier layer of C6 fluorocarbon polymers that repels liquids and soiling. It's been our go to product for many years for adding water repellency and stain protection to seats, carpets and floor mats (and suede trainers too!). Able to withstand mechanical wear for upwards of six months at a time and virtually impervious to whatever you throw at it (children and pets included) it's one of those products that pays for itself in terms of the benefits it offers.
Beading10/10(Compared To Others)
Durability6 Months +(Average Value)
Nanolex Textile & Leather Sealant is an advanced textile coating that forms a semi-permanent water and oil repellent barrier on all automotive textiles, including all types of leathers. Developed in Germany, it uses a water-based delivery system to lay down a self-organising micro-film of C6 fluorocarbon polymers that dries to form an invisible and fully breathable coating that chemically bonds to treated surfaces at the molecular level. Following application, everyday spillages simply bead up on treated surfaces, helping to prevent stains from forming and enabling easy mopping up.
|Chemical Basis||Polymer-based (fluorinated)|
|Contains UV Absorbers||Yes|
|Durability||6 months +|
|Emits Strong Fumes||Yes|
|Suitable For||Fabric and leather surfaces (all types)|
How To Use
For best results, surfaces to be treated with Nanolex Textile & Leather Sealant must be spotlessly clean and completely dry before use. Working in a warm, dry place out of direct sunlight, Nanolex Textile & Leather Sealant should either be sprayed on liberally and rubbed in well with gloved hands (fabric surfaces) or wiped on evenly with a Meguiar's Microfiber Applicator Pad (leather surfaces) before being left to dry for half an hour. Once dry, a further application should be made to ensure that maximum protection is achieved. Any overspray on to adjacent surfaces should be wiped away immediately with a Nanolex Microfiber Buffing Towel. In order to get the best performance and quoted durability from the resulting finish, allow it to cure for a further 24 hours before using your car.