Staying true to their ethos, Microfiber Madness have thought outside the box and come up with a slightly crazy but hugely innovative solution to a common problem in car care. If you towel dry your car after each wash (as opposed to blowing it dry or rinsing it with deionised water) you'll know only too well how frustrating it is when water continues to dribble out of the shuts and other crevices for many hours afterwards. At best this is a temporary eyesore, but in hard water areas it can result in persistent water spots forming, which then blight the finish until it is next polished. The Microfiber Madness Dropnetic solves this problem by enabling you to stick (using sewn-in magnets) a small strip of ultra-absorbent microfibre material immediately below the source of any dribbles. This is a blindingly obvious solution to a perennial problem in car care, executed to the usual gold standard that Microfiber Madness products have become renowned for.
Absorbency10/10(Compared To Others)
Construction75:25(% Polyester:% Polyamide)
Grammage1200 g/m²(Approximate Value)
The Microfiber Madness Dropnetic is made from the same supremely absorbent 75:25 (polyester:polyamide) microfibre material that first featured in the Microfiber Madness Dry Me Crazy. To get the resulting strips of material to adhere to the bodywork, small magnets are enclosed within sealed pockets at evenly spaced intervals along each strip (two magnets are enclosed within the shortest mini strips, four magnets are enclosed within the medium-length 2x strips, while eight magnets are enclosed within the longest xl strip). These magnets have been specially coated to prevent them from rusting over time. The softness of the material ensures that there is no risk of marring the finish as you attach and remove the strips, and the level of adhesion is sufficient to hold them on while driving at low speeds (i.e. if you like to drive around the block to dry your brake discs after each wash). The Microfiber Madness Dropnetic can be hand washed when necessary.
|75% polyester, 25% polyamide (colour may vary)
|BUY 3 OR MORE SAVE 5%
|Yes (hand only)
How To Use
Care instructions: (i) hand wash gently after each use at a low temperature (30°C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners) and rinse thoroughly (machine washing is not recommended under any circumstances); (ii) allow to dry naturally on a washing line, in an airing cupboard or stuck to a warm (not hot) radiator (tumble drying is not recommended under any circumstances), and; (iii) once completely dry, store sealed in the supplied plastic storage jar until next use.