Marred ceramic nano-particle and scratch-resistant finishes can be quite difficult to correct, even if the defects appear to be very light. Why? Because such paints are physically very hard, and normal finishing polishes aren't always robust enough to cut them effectively. Menzerna Super Finish 3500 (PO106FA) solves this problem by swapping out fragile aluminium oxide particles for robust precision-milled diminishing abrasives. These also work well on conventional intermediate and hard paint finishes without prematurely breaking down, meaning that you'll make good progress in no time at all.
|Contains Abrasive Particles
|Contains Fillers And Glazing Oils
|Suitable For Hand Use
|Suitable For Hard Paints
|Suitable For Intermediate Paints
|Suitable For Machine Use
|Suitable For Soft Paints
How To Use
You can use Menzerna Super Finish 3500 (PO106FA) by hand or machine, although for best results we recommend the latter. By hand, it should be applied to freshly decontaminated paint using a SCHOLL Concepts Polishing Puck. Only 1-2 pea-sized drops of product are required to polish a 12 x 12 area, and these should be worked in as firmly and evenly as possible until only an oily residue remains. This residue should then be buffed off using a PB Super Buffing Towel. For best results using a dual action polisher, Menzerna Super Finish 3500 (PO106FA) should be applied to freshly decontaminated paint using a Gyeon Q²M Eccentric Polishing Pad. Only 3-4 pea-sized drops of product are required per 18 x 18 area, and these should be worked in thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action polishers) until only a thin oily residue remains. This residue should then be buffed off carefully using a PB Super Buffing Towel.