We Say
Meguiar's Endurance Tire Gel goes on very easily with little fuss or mess, and produces a glossy looking finish that is easily adjusted in terms of shine level. A single coat dries to give a dark rich gloss in around 1-2 hours. If even more gloss is desired, a second coat should be applied 10 minutes after the first. Durability is excellent; under typical British weather conditions each application usually lasts for a minimum of three weeks.
Key Features
Adds ProtectionYes(UV Absorbers)
Durability3 Weeks +(Average Value)
Shine Level4/10(Single Coat)
Description
Meguiar's Endurance Tire Gel is a solvent-based gel engineered from advanced macro-polymers and co-polymers. Although it contains petroleum distillates, its unique formula will not degrade or stain your tyres in any way, even when used on a regular basis. The viscosity of the gel enables precise application and minimises the risk of sling. Treated tyres retain a dark rich gloss that lasts wash after wash for many weeks at a time.
Specification
| Adds Protection | Yes |
|---|---|
| Chemical Basis | Solvent-based |
| Contains UV Absorbers | Yes |
| Darkening Effect | Yes |
| Durability | 3 weeks + |
| Layerable | Yes (allow 10 minutes between coats) |
| Shine Level | |
| Size | 473 ml |
| Suitable For | Rubber surfaces |
How To Use
For best results, ensure your tyres are spotlessly clean and dry before use. Only 3-4 pea-sized drops of Meguiar's Endurance Tire Gel are required per tyre, and these should be applied as thinly and evenly as possible using either a Meguiar's Tyre Dressing Applicator Pad or a Flexipads Split Foam Applicator Pad; you will be amazed at how far you can stretch the resulting film around the tyre without needing to add any more product. Once applied, leave it to dry fully for 1-2 hours before driving. If this is not possible, wipe each tyre down gently with a PB Utility Towel to remove any excess and minimise the risk of sling.