Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

MaxShine Microfibre Clay Mitt - Fine Grade

£21.00
  • Fine grade
  • Microfibre mitt
  • For paint decontamination

Availability: Translation missing: en.general.icons.icon_check_circle icon 10+ available, ready to ship

We Say

Smooth paintwork without the endless kneading of a traditional clay bar. This reusable fine-grade mitt makes removing bonded contamination quicker and more convenient.

Even after a thorough wash, paintwork can still feel slightly rough when you run your fingertips across it. That's usually a sign of bonded contamination, which ordinary shampoo simply isn't designed to remove. The MaxShine Fine Grade Microfibre Clay Mitt offers a convenient alternative to traditional detailing clay, using a synthetic polymer surface to lift stubborn deposits and restore that smooth, freshly decontaminated feel.

What we particularly like about clay mitts is how easy they are to handle. There's no constant folding or reshaping, and the generous 21 × 16cm size makes covering larger panels straightforward. The fine-grade surface is a sensible choice when you don't need the extra aggression of heavy-duty clay. We'd recommend removing as much contamination as possible with CARPRO IronX beforehand, then using plenty of a compatible lubricant such as CARPRO Immolube. If you're comparing different options, browse our clay bars and clay mitts. Remember that even fine-grade clay can cause light marring, particularly on softer paintwork.

Key Features

Clay Grade FINE (For bonded surface contamination)
Construction DUAL-SIDED (Microfibre and synthetic clay)
Size 21 × 16CM (Reusable mitt design)

Description

MaxShine Microfibre Clay Mitt Fine Grade is a reusable paint decontamination mitt designed to remove bonded surface contamination that remains after conventional washing. Combining a microfibre washing surface with a fine-grade synthetic clay polymer layer, it provides an alternative to traditional clay bars for preparing vehicle paintwork before polishing, waxing or applying a protective coating.

The synthetic clay surface helps remove deposits such as industrial fallout, paint overspray and other stubborn particles attached to exterior finishes. Its fine-grade construction is intended for less aggressive decontamination, while the microfibre backing provides a convenient surface for handling and washing. The mitt measures approximately 21 × 16cm, with MaxShine specifying a 450GSM microfibre construction.

Unlike conventional clay bars that must be repeatedly folded to expose fresh material, the clay mitt can be rinsed during use to remove accumulated contamination. MaxShine estimates that the mitt may be reused for approximately 20–50 vehicles, depending on care and the severity of contamination. Always use plenty of suitable lubrication and work with minimal pressure, as mechanical decontamination can cause surface marring and may affect existing wax or sealant protection.

Specification

More Information
Clay Grade Fine
Colour Red and black
Construction Microfibre and synthetic clay polymer
Fabric Weight 450GSM
Product Code 204003MT
Reusability Approx. 20–50 vehicles (manufacturer estimate)
Size 21 × 16cm

How To Use

  1. Wash and prepare the vehicle

    Thoroughly wash and rinse the vehicle to remove loose dirt and grit. Where necessary, use suitable chemical decontamination products to reduce bonded contamination before claying. Work on cool surfaces out of direct sunlight and test an inconspicuous area first.

  2. Lubricate the surface

    Wet the mitt and apply a generous amount of compatible clay lubricant or suitable shampoo solution to both the clay surface and the panel. Never use the mitt dry, as insufficient lubrication increases the risk of marring.

  3. Gently remove contamination

    Glide the synthetic clay side across the lubricated paintwork using straight, overlapping movements and minimal pressure. Work in small sections, keeping the surface wet and regularly rinsing the mitt to remove loosened contamination. Stop if excessive resistance or visible marking occurs.

  4. Rinse, inspect and store

    Rinse away remaining lubricant and inspect the treated paintwork. Clean the mitt thoroughly with water, removing trapped contamination, and allow it to dry naturally before storage. MaxShine recommends soaking the mitt in water overnight when necessary to help release accumulated dirt. Do not use on hot surfaces or store the mitt while contaminated.

Customer Reviews