MaxShine Detailing Clay Bar (Fine Grade) 150g
by
MaxShine
£12.00
- Fine grade
- 150 g clay bar
- For bonded contamination
We Say
Paintwork can look perfectly clean but still feel surprisingly rough. Fine-grade clay removes the bonded contamination that washing leaves behind, restoring a smoother surface ready for fresh protection.
Even after a thorough wash, paintwork can retain tiny deposits of industrial fallout, overspray and environmental contamination. You can often feel them by gently running your fingertips over a freshly cleaned panel. MaxShine Fine Grade Detailing Clay is designed to remove these deposits mechanically, helping restore that smooth finish without needing the more aggressive cleaning action of a heavy-grade clay.
For most reasonably maintained vehicles, we'd start with fine-grade clay rather than automatically reaching for something stronger. It's a sensible choice when preparing paintwork for polishing or applying fresh wax or sealant, particularly after chemical decontamination. We'd recommend using plenty of Gyeon Q²M ClayLube and removing iron contamination beforehand with CARPRO IronX. Fine-grade clay is generally less aggressive, but it can still cause light marring, so gentle pressure and good lubrication remain essential.
Key Features
Clay Grade
FINE
(For light to moderate contamination)
Pack Size
150G
(Three 50g bars)
Application
HAND USE
(Use with suitable lubrication)
Description
MaxShine Detailing Clay Bar (Fine Grade) is a mechanical surface decontamination product designed to remove bonded contamination from automotive paintwork and other compatible smooth exterior surfaces. Its fine-grade formulation is intended for lighter cleaning requirements than MaxShine's Heavy Grade alternative.
The clay removes contamination such as industrial fallout, rail dust, tree sap mist, paint overspray and stubborn environmental deposits that remain attached after conventional washing. MaxShine identifies compatible paintwork, glass, metal and plastic as suitable surfaces for treatment.
Each pack contains three white 50g clay bars, providing a total of 150g, supplied in a plastic storage box. The clay is moulded into a flat working surface and gently moved across lubricated panels to lift bonded deposits. MaxShine recommends using a dedicated clay lubricant, although the manufacturer also permits water as an alternative.
Fine-grade clay is suitable for preparing paintwork before polishing, waxing, sealing or ceramic coating application. As with any mechanical decontamination process, adequate lubrication and careful technique are necessary to minimise the risk of surface marring.
Specification
| Clay Grade | Fine |
|---|---|
| Colour | White |
| Contents | 3 × 50g clay bars |
| Lubrication | Required |
| Product Code | MS-2043150W |
| Suitable Surfaces | Compatible paint, glass, metal and plastic |
How To Use
-
Wash and prepare
Thoroughly wash and rinse the vehicle to remove loose dirt and grit. Use an iron fallout remover or tar remover beforehand where necessary. Work on cool surfaces out of direct sunlight.
-
Prepare the clay
Take a manageable portion of clay and knead it into a flat patty. Liberally spray a suitable clay lubricant over the panel and the clay itself. Keep both surfaces well lubricated throughout the process.
-
Gently remove contamination
Glide the clay over a small section using light pressure and controlled movements. As the bonded contamination is removed, the surface should begin to feel smoother. Fold the clay regularly to expose a clean working face and replenish lubricant as necessary. Discard any clay dropped onto the ground.
-
Wipe clean and inspect
Remove the remaining lubricant and released contamination according to the lubricant instructions. Inspect the surface for any remaining bonded deposits or light marring, then polish if required before applying fresh wax, sealant or ceramic protection.