Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

Gyeon Q² Matte EVO Light

by Gyeon

We Say

The Light versions of Gyeons coatings are no different to their regular coatings, the only difference is they contain the coatings only. These are great for those that don't require the extra bits included. In the case of Q2 Matte EVO Light, it doesn't contain the applicators and the Q2M Cure Matte. If you require the full kit, it can be found here: Gyeon Q2 Matte EVO

Key Features

Beading8/10(Compared To Others)
Durability24 Months(Average Value)
Slickness8/10(Compared To Others)


Gyeon Q² Matte EVO Light is an advanced quartz coating that simultaneously protects and enhances the appearance of matt paint finishes and matt vinyl wraps. Developed in South Korea, Gyeon Q² Matte EVO Light uses the latest in low volatile content silicon (Si) technology to lay down a film of siloxane polymers that condense rapidly to form a fully crystallized SiO2 coating that bonds to treated surfaces at the molecular level. Unlike many rival products developed for matt finishes, Gyeon Q² Matte contains very little alcohol and therefore doesn't flash off rapidly, which makes the application process much easier. Furthermore, Gyeon Q² Matte EVO Light doesn't need to be layered to achieve its stated durability; only a single coat is required. These characteristics make Gyeon Q² Matte user-friendly and well suited to the needs of both home enthusiasts and professional detailers alike.

Surfaces treated with Gyeon Q² Matte EVO Light become hydrophobic (water-hating), which causes rainfall and rinse water to bead up and roll off very quickly. This extreme beading not only looks good but also tends to pick up and carry away fresh contaminants, thus encouraging strong self-cleaning behaviour. In addition to these benefits, Gyeon Q² Matte provides excellent protection against bird droppings, bug splatter, road salt and harmful UV radiation for upwards of twelve months at a time. In all cases the original matt (or satin) effect is fully preserved, although on older surfaces a degree of colour jetting (i.e. darkening) may be observed. Gyeon Q² Matte EVO Light is currently supplied as a pre-packed kit containing a 50 ml bottle of Gyeon Q² Matte, a Gyeon Q²M Applicator, stickers and an instruction booklet.


More Information
Adds Protection Yes
Application Method By hand only
Durability 24 months
Emits Strong Fumes Yes
Enhances Gloss No
Flake Pop
Layerable Yes (allow 1 hour between coats)
Recommended For Matt finishes (painted and wrapped)
Scratch Resistant Yes
Size 50 ml Kit
Trim-Safe No

How To Use

You should apply Gyeon Q² Matte EVO Light in a dry place out of direct sunlight. To protect your skin, we recommend wearing PB Nitrile Gloves during the application process. In all cases, prepare the matt surfaces you are going to treat in the normal way (wash > decontaminate), and then do a wipe down with Gyeon Q²M Prep to ensure that they are spotlessly clean. Next, using the supplied dropping pipette, lightly wet the Gyeon Q²M Applicator Suedes with product, wrap it around a Gyeon Q²M Applicator Block and begin wiping it evenly on to the first panel, using light pressure and overlapping strokes. You should aim to treat no more than a single panel at a time, because after an initial volatilization period of 1-2 minutes you must then buff off the (still wet) residue as quickly as possible, i.e. before it fully dries out and begins to harden. Buffing off is best accomplished with a PB Super Buffing Towel, using moderate speed and pressure to fully remove the residue and reveal a uniform, streak-free finish. Using a bright light, check the panel carefully for any smears and remove them before moving on; failure to remove smears fully can result in them hardening to the point of being impossible to remove, so be thorough!

After all panels are treated the car must then be left in a warm, dry place out of direct sunlight for a minimum of 24 hours to allow the SiO2 coating to harden (if you wish, you can accelerate this process by heating the treated panels to 60°C for 10 minutes using an infra-red heat lamp). Finally, to reduce the risk of water spots forming while it continues to cure (full curing takes around 14 days to achieve), you should apply a protective topcoat of Gyeon Q²M Cure Matte (you should also avoid washing the car with any kind of detergent for the first 7 days). Please note that you must discard all applicators and towels after use, because Gyeon Q² Matte EVO Light hardens significantly as it cures, forming a residue that has the potential to inflict severe marring or worse if applicators and towels are re-used. Furthermore, after each use you must also replace the dropping pipette with the air-tight cap, and then wash out the pipette with hot water. Failure to follow these steps will result in any leftover product setting solid in the bottle and the pipette, rendering them unusable in the future.