Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

Gyeon Q² FabricCoat

by Gyeon

We Say

Gyeon Q² FabricCoat is an advanced silica-based coating for modern automotive textiles that lays down an invisible hydrophobic (water-hating) barrier that repels liquids and soiling. Able to withstand mechanical wear for upwards of six months at a time and virtually impervious to liquids and grime, it pays for itself in terms of the benefits it offers. Just think: (i) no more drink spillage disasters when children are in your car (just a simple mopping up job instead), and; (ii) no more continually damp floor mats and carpets during the winter months. It also works a treat on fabric convertible tops too, and reduces the need for regular maintenance.

Key Features

Adds ProtectionYes(Silica-Based)
Beading9/10(Compared To Others)
Durability6 Months +(Average Value)


Gyeon Q² FabricCoat is a functional silica-based coating that forms a semi-permanent water and grime repellent barrier on all modern automotive textiles, both inside and out. It uses the latest in low volatile content silicon (Si) technology to lay down a film of dimethylsiloxane polymers that condense rapidly to form a highly flexible SiO2 coating that bonds to fabrics at the molecular level. Following application, treated surfaces become extremely hydrophobic and thus virtually impervious to liquids and grime. In addition, this coating also blocks out UV radiation from the sun, and thus helps to prevent textiles from fading over time.


More Information
Adds Protection Yes
Chemical Basis Silica-based
Contains UV Absorbers Yes
Durability 6 months +
Emits Strong Fumes Yes
Stain Resistant Yes
Suitable For Fabric surfaces

How To Use

For best results, fabric surfaces to be treated with Gyeon Q² FabricCoat must be spotlessly clean and completely dry before use. Working in a warm, dry place out of direct sunlight, Gyeon Q² FabricCoat should be sprayed on liberally and then rubbed in well with gloved hands before being left to dry for half an hour. Once dry, a further application should be made to ensure that maximum protection is achieved. Any overspray on to adjacent surfaces should be wiped away immediately with a PB Utility Towel. In order to get the best performance and quoted durability from the resulting finish, allow it to cure for a further 12 hours before using your car or exposing the treated surfaces to the elements.