Water spotting can be a nightmare on any vehicle and very stubborn to remove, even on coated vehicles. Gtechniq W9 helps to remove water spots with ease.
Agitation RequiredYes(See How To Use)
Cleaning Strength10/10(Compared To Others)
DilutableNo(Ready To Use)
Gtechniq W9 Water Spot Remove is a powerful water spot remover which is 100% coating safe. W9 features a three mechanism approach to removing water spots. It dissolves and removes salts, traps metal ions, which are commonly found in tap water. And finally removes silica scale which are traditionally very tough to eliminate. Hard water spots and silica scale will disappear from the exterior surface with ease and works well on water spots on glass too! W9 is safe for use on all paint types, including matte finishes.
|Maximum Dwelling Time||30 seconds|
|Strips Sealants And Waxes||Yes|
How To Use
Use W9 after the vehicle is clean and dry and do not apply in direct sunlight. Shake well and use gloves. Spray W9 liberally on to a clean microfibre towel and wipe into an areas no bigger than 20x20cm. Buff area with a second, clean microfibre towel and repeat if necessary. Wash vehicle again after application.