Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

Gtechniq Crystal Serum Light + EXO v5 Kit


We Say

Gtechniq have paired together two of their best prosumer coatings to create the ultimate protection for your vehicle, short of going to a Gtechniq Authorised Detailer for Crystal Serum Ultra. Crystal Serum Light is a tough coating which gives 3 Years + Protection and EXO whilst in it's own right is a very tough, durable coating, really delivers the looks, slickness and water / dirt repellency here.

Key Features

Beading10/10(Compared To Others)
Durability24 Months(Approx for EXO v5)
Slickness10/10(Compared To Others)


Gtechniq have combined Crystal Serum Light and EXO v5 to create to ultimate prosumer coating kit for your vehicle. Whilst each coating in it's own right offers impressive protection, gloss and repellency, they work even better together. Crystal Serum Light offers 3- 5 years of tough protection designed as a base layer. EXO v4 over the top boosts the gloss, slickness and over all water and dirt repellency lasting for up to 24 months.


More Information
Adds Protection Yes
Application Method By hand only
Durability 24 months
Emits Strong Fumes Yes
Enhances Gloss Yes
Flake Pop
Recommended For All paint types and colours
Scratch Resistant Yes (Wash marring)

How To Use

Ensure vehicle is clean, dry and free of any contamination. Paint correction prior to application is recommended to get the best visuals from this coating. Apply the coatings indoors in temperatures between 5c and 25c. Before applying coatings, use Gtechniq Panel Wipe to clean the surface of any greases or oils. Starting with Crystal Serum Light, soak the applicator with 3 full measures of CSL from the pipette and work the liquid into the pas to get an even saturation. Replace the lid on the bottle and set aside, do not leave the lid off or keep in your hands, this can cause premature curing. Apply in overlapping strokes on an area roughly 2ft x 2ft. Immediately wipe residue down with a Gtechniq MF1 Towel. You may need to buff the area several times but avoid doing so with too much force. We recommend the use of 2 cloths, making sure to rotate them during removal to prevent CSL curing in the cloth. Inspect the surface for residue using a bright, diffused light. The final layer is EXO. You should wait at least 1 hour before applying over the top of CSL. Prime the applicator with a good amount of product to ensure even coverage. Apply to the surface using overlapping motion in a 2ft x 2ft area and wait for 1 - 2 minutes before buffing with a Gtechniq MF1 Towel, followed by a second towel to remove any smears. One the whole vehicle is coated, we recommend repeating the process from where you started to give the car a second layer of EXO. After application allow the coating to cure for at least 12 hours before exposure to moisture. Do not wash the vehicle for at least 7 days.