We Say
A considered full-size rotary with precise speed control, a low gear head and the comfortable feel needed for long correction sessions.
The FLEX PE14-2-150 is aimed at users who want a capable full-size rotary without a bulky, awkward machine in their hands. Its shaped front grip, rubberised contact areas and balanced housing make a difference when polishing large sections of paintwork.
A 1400W input motor provides the power for direct rotary cutting, while a wide low-speed range gives more flexibility for refinement and sensitive areas. The accelerator trigger allows the operator to build speed smoothly rather than immediately engaging at a fixed setting.
FLEX's variable-speed electronics include speed regulation, overload protection and restart protection, all useful on a machine intended for regular professional work. The low gear head also helps keep the working end of the machine closer to the panel.
This is a machine we would consider for substantial correction work where the operator is already comfortable managing rotary movement, pad contact and temperature. Choose the backing plate and pad for the panel, because neither is supplied with the version described in the source.
Key Features
Power Input1400W(Mains-powered motor)
Speed Range380–2100(No-load rpm)
Weight2.2KG(Ergonomic housing)
Description
The FLEX PE14-2-150 is a full-size rotary polisher designed for demanding paint correction and machine polishing.
Its soft-grip housing, variable-speed accelerator and electronic speed control give an experienced operator useful control over correction and refinement work. The backing plate and pad should be purchased separately.
Why you'll love it:
✓ 1400W motor input with 880W stated output
✓ 380–2100 rpm no-load speed range
✓ Variable-speed accelerator trigger
✓ Electronic overload and restart protection
✓ Low-profile gear head and shaped SoftGrip housing
✓ M14 spindle fitting
✓ Four-metre power cable
✓ Backing plate and polishing pad not included
Specification
| Power Input | 1400W |
|---|---|
| Power Output | 880W |
| No-load Speed | 380–2100 rpm |
| Maximum Backing Plate | 150mm (not supplied) |
| Maximum Pad Diameter | 200mm (not supplied) |
| Spindle Thread | M14 |
| Cable Length | 4m |
| Weight | 2.2kg |
How To Use
1) Prepare the paintwork:
Wash, decontaminate and dry the vehicle. Inspect the paint and protect sensitive trims and edges as required.
2) Select the right accessories:
Fit a compatible backing plate and pad, then choose a compound or polish suitable for the paint condition. Check the manufacturer's instructions and any kit-specific contents.
3) Start at a controlled speed:
Apply a modest amount of polish to the pad. Begin at low speed to spread the product, with the pad positioned carefully on the panel.
4) Work in manageable sections:
Keep the pad moving evenly with controlled pressure. Monitor paint temperature, pad condition and product residue, especially near edges and raised body lines.
5) Inspect and refine:
Wipe away residue with a clean microfibre cloth and check the result under suitable lighting. Repeat or refine with a less aggressive combination if necessary.
Important Notes:
✓ Rotary machines use direct pad rotation and require suitable technique
✓ Always use the appropriate backing plate, pad and polish combination
✓ Monitor heat and avoid lingering over edges or sensitive paint
✓ Disconnect mains machines or remove batteries before accessory changes
✓ Follow the manufacturer's operating and safety instructions
Product Information
This is an electrical machine polisher, not a chemical preparation. It does not require a chemical Safety Data Sheet for the machine itself.
Backing plate and polishing pad are not included in the listed configuration.
Read the supplied manufacturer instruction manual before use. Follow electrical and battery safety guidance, as applicable, and check the safety information for any polishes or compounds used with the machine.