We Say
When a full-size rotary is too much machine for the panel, the compact PE 8-4 80 gives you the access and control to work more precisely.
Bumpers, pillars and tight bodywork can be frustrating with a large rotary polisher. The FLEX PE 8-4 80 is a compact alternative intended for smaller polishing pads and intricate areas, without giving up the direct rotation that makes rotary correction effective.
The shorter body and relatively low 1.8kg weight make the machine easier to position in awkward locations. With its variable-speed control and soft-start function, you can bring a small pad into contact with the panel more gently and adjust the operating speed to suit the task.
A 75mm backing plate is included with the listed configuration, which makes this a useful option if you're building a dedicated spot-correction setup. It is particularly well suited to the smaller areas that do not justify a full-size pad.
We see the PE 8-4 80 as a specialist complement to a main polishing machine, rather than a replacement for one. It makes far more sense when the job is a narrow pillar or contoured bumper than when you have an entire bonnet to correct.
Key Features
Backing Plate75MM(Included)
Speed Range1300–3900(No-load rpm)
Weight1.8KG(Compact rotary body)
Description
The FLEX PE 8-4 80 is a mini rotary polisher for controlled machine polishing on small and intricate vehicle panels.
Its compact construction and smaller pad format help with access around bumper sections, pillars and curved bodywork. A soft-start function and variable-speed selector give the operator useful control during focused correction work.
Why you'll love it:
✓ Compact rotary designed for smaller panels
✓ 75mm backing plate included
✓ Maximum stated polishing pad diameter of 80mm
✓ 1300–3900 rpm no-load speed range
✓ Soft-start operation and speed selection
✓ M14 fitment
✓ Side handle included
✓ 1.8kg stated weight
Specification
| Type | Compact mains-powered rotary |
|---|---|
| No-load Speed | 1300–3900 rpm |
| Maximum Backing Plate | 75mm |
| Backing Plate Supplied | 75mm |
| Maximum Pad Diameter | 80mm |
| Spindle Fitment | M14 |
| Weight | 1.8kg |
| Plug | UK fused plug (as supplied) |
How To Use
1) Prepare the paintwork:
Wash, decontaminate and dry the vehicle. Inspect the paint and protect sensitive trims and edges as required.
2) Select the right accessories:
Fit a compatible backing plate and pad, then choose a compound or polish suitable for the paint condition. Check the manufacturer's instructions and any kit-specific contents.
3) Start at a controlled speed:
Apply a modest amount of polish to the pad. Begin at low speed to spread the product, with the pad positioned carefully on the panel.
4) Work in manageable sections:
Keep the pad moving evenly with controlled pressure. Monitor paint temperature, pad condition and product residue, especially near edges and raised body lines.
5) Inspect and refine:
Wipe away residue with a clean microfibre cloth and check the result under suitable lighting. Repeat or refine with a less aggressive combination if necessary.
Important Notes:
✓ Rotary machines use direct pad rotation and require suitable technique
✓ Always use the appropriate backing plate, pad and polish combination
✓ Monitor heat and avoid lingering over edges or sensitive paint
✓ Disconnect mains machines or remove batteries before accessory changes
✓ Follow the manufacturer's operating and safety instructions
Product Information
This is an electrical machine polisher, not a chemical preparation. It does not require a chemical Safety Data Sheet for the machine itself.
This is a rotary machine, not a dual-action polisher. Use a small, compatible pad and carefully control panel temperature.
Read the supplied manufacturer instruction manual before use. Follow electrical and battery safety guidance, as applicable, and check the safety information for any polishes or compounds used with the machine.