Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

Collinite - Slickr Ceramic 3-In-1 Detailer

£16.00




We Say

Slickr is an extremely versatile spray detailer that can be used as a Gloss Booster, Drying Aid, Topper & more and features a Si02+polymer structure, meaning it leaves an extremely slick finish and fast hydrophobic results.

Key Features

Beading 9/10 ((COMPARED TO OTHERS))
Durability 3 months (Average)
Slickness 8/10 (Compared to others )

Description

No. 150 Slickr Ceramic 3 in 1 quickly & easily adds hydrophobic water beading properties + a high gloss, hyper-slick finish to a variety of automotive exterior surfaces. With an SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to also be used as a drying aid, topper, clay lubricant or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.

Specification

More Information
APPLICATION METHOD BY HAND
ADDS PROTECTION YES
DURABILITY (3 MONTHS)
ENHANCES GLOSS YES
INTERIOR/EXTERIOR EXTERIOR
SIZE 473ML
COVERAGE 600-1,000 SQ FT

How To Use

TIPS: Always test product first in a small, inconspicuous area to ensure desired result.

DIRECTIONS: Shake well before each use. For best results, use only on clean/non soiled surfaces. Using a 2 microfibre towel process, apply 3-4 sprays of Slickr directly on to a 3 x 3ft area. Spread product evenly on the surface with towel 1. Remove with towel 2 (dry) before product dries. Flip towel 2 and change as ncessary.

As a lubricating drying aid: Following a wash-while vehicle surface is still wet-apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using a microfiber towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass).

As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberized side). With minimal pressure, move decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface in order to maintain slickness/lubrication and to avoid marring. Remove product from panel with a dry microfiber towel. Repeat process on all painted surfaces (and glass).

Reviews