BLACKFIRE Tire Gel goes on very easily with little fuss or mess, and produces a rich looking finish that can easily be adjusted in terms of the shine level. The formula gives a glossy look upon initial application, but dries to give a rich satin black finish in around 1-2 hours. If more gloss is desired, a second application 5 minutes after the first will produce a glossier-looking finish once dry. Durability is excellent for a water-based dressing; under typical British weather conditions each application usually lasts for a minimum of three weeks.
Adds ProtectionYes(UV Absorbers)
Durability3 Weeks +(Average Value)
Shine Level7/10(Single Coat)
BLACKFIRE Tire Gel is a thick water-based tyre dressing fortified with protective super-polymers and UV inhibitors. It contains no petroleum distillates or silicones of any kind, meaning that it will not degrade your tyres in any way, even when used on a regular basis. The viscosity of the gel enables precise application and minimises the risk of sling being thrown on to adjacent body panels. Treated tyres retain a rich satin black finish that lasts wash after wash for many weeks at a time.
|Contains UV Absorbers||Yes|
|Durability||3 weeks +|
|Layerable||Yes (allow 5 minutes between coats)|
|Suitable For||Rubber surfaces|
How To Use
For best results, ensure your tyres are spotlessly clean and dry before use. Only 3-4 pea-sized drops of BLACKFIRE Tire Gel are required per tyre, and these should be applied as thinly and evenly as possible using either a BLACKFIRE Foam Applicator Pad or a Flexipads Split Foam Applicator Pad; you will be amazed at how far you can stretch the resulting film around the tyre without needing to add any more product. Once applied, leave it to dry fully for 1-2 hours before driving. If this is not possible, wipe each tyre down gently with a PB Utility Towel to remove any excess and minimise the risk of sling.