We Say
Some of the contamination on your paint and wheels is invisible until a fallout remover gets to work.
A car can look clean after washing and still have embedded contamination left on the surface. Iron particles from brakes and road use are a good example. They won't always come away with shampoo, and rubbing harder isn't the answer.
BETTER Reaction is designed for that chemical decontamination stage. It reacts with ferrous contamination on compatible paintwork and wheel finishes, helping loosen particles before you rinse them away. It's especially useful ahead of machine polishing or whenever the surface feels rough even after a thorough wash.
What matters most is working on a suitable cool surface, giving the product the correct amount of dwell and never letting it dry. On heavily contaminated areas we'd rather repeat a controlled application than leave chemicals sitting for too long. It isn't a replacement for tar remover or clay where those are genuinely required, but it's a valuable step in a considered decontamination process.
Key Features
TargetsIRON(Ferrous fallout deposits)
Dwell1–2 MIN(Source guidance)
DilutionNEAT / 1:1(According to contamination)
Description
BETTER Reaction Iron Fallout Remover An iron fallout remover for loosening ferrous contamination on compatible paintwork and wheel finishes.
Why you'll love it:
✓ Targets embedded iron fallout contamination
✓ Designed for compatible paint and wheel surfaces
✓ Use undiluted for stronger decontamination
✓ 1:1 dilution noted for lighter cleaning
✓ Useful preparation before polishing or protection
Specification
| Product Type | Iron fallout remover |
|---|---|
| Full-strength Use | Undiluted |
| Lighter Cleaning | 1:1 product to water |
| Typical Reaction Time | Approximately 1–2 minutes; never allow to dry |
How To Use
1) Wash the area:
Remove loose road dirt first.
2) Check the finish:
Use only on a compatible cool surface away from direct sunlight.
3) Apply evenly:
Apply at the appropriate dilution and allow brief reaction time.
4) Agitate if suitable:
Use a compatible soft wheel brush or mitt only where appropriate.
5) Rinse thoroughly:
Do not let product dry; repeat if necessary after inspection.
Safety Data
Refer to the label and Safety Data Sheet. Check wheel-finish compatibility and avoid drying on surfaces.