Auto Finesse Satin is an awesome tyre crème that produces an attractive looking finish that is easily adjusted in terms of shine. A single coat dries to give a dark matt finish in around ten minutes. A second coat gives a rich satin sheen, while a third gives a bold glossy look. Under typical British weather conditions each application usually lasts for a minimum of three weeks.
Adds ProtectionYes(UV Absorbers)
Durability3 Weeks +(Average Value)
Shine Level4/10(Single Coat)
Auto Finesse Satin is a super slick tyre crème that goes on effortlessly and gives varying degrees of shine, depending on how many coats you apply. The quick drying formula eliminates the potential for unsightly overspray, runs and drips, and minimises the risk of sling. Treated tyres will retain their look wash after wash for many weeks at a time.
|Contains UV Absorbers
|3 weeks +
|Yes (allow 10 minutes between coats)
How To Use
For best results, ensure your tyres are spotlessly clean and dry before use. Only 3-4 pea-sized drops of Auto Finesse Satin are required per tyre, and these should be applied as thinly and evenly as possible using either an Auto Finesse Dual Foam Applicator Pad or a Flexipads Split Foam Applicator Pad; you will be amazed at how far you can stretch the resulting film around the tyre without needing to add any more product. Once applied, leave it to dry fully for 30 minutes before driving. If this is not possible, wipe each tyre down gently with a PB Utility Towel to remove any excess and minimise the risk of sling.