For best results, fabric surfaces to be treated with Gyeon Q² FabricCoat must be spotlessly clean and completely dry before use. Working in a warm, dry place out of direct sunlight, Gyeon Q² FabricCoat should be sprayed on liberally and then rubbed in well with gloved hands before being left to dry for half an hour. Once dry, a further application should be made to ensure that maximum protection is achieved. Any overspray on to adjacent surfaces should be wiped away immediately with a PB Utility Towel. In order to get the best performance and quoted durability from the resulting finish, allow it to cure for a further 12 hours before using your car or exposing the treated surfaces to the elements.