We Say
Pre-washing has become one of the most important stages in safe vehicle washing. Removing loose dirt before touching the paint significantly reduces the risk of introducing swirl marks during the contact wash stage.
ValetPRO pH Neutral Snow Foam is designed specifically for this pre-wash stage, producing a thick layer of foam that clings to the surface and allows the surfactants within the formula time to begin loosening dirt and traffic film.
Because the formula is pH neutral, it can be used safely on vehicles protected with waxes, sealants and modern ceramic coatings without degrading those protective layers. This makes it ideal for regular maintenance washes where you want to preserve existing protection. The foam works by increasing dwell time on vertical surfaces. Rather than immediately running off the paint, the foam holds cleaning agents against the surface long enough to soften and lift contamination before rinsing.
In short, this is exactly the type of snow foam designed for routine maintenance washing. If you want a thick, safe pre-wash that helps remove dirt while protecting existing coatings or wax layers, this is a very dependable option.
Key Features
Foaming 9/10 (Dense foam)
Cleaning 7/10 (Maintenance wash)
Protection Safe (pH neutral)
Description
ValetPRO pH Neutral Snow Foam is a pre-wash foam designed to loosen dirt and road grime prior to the contact wash stage.
The thick clinging foam increases dwell time on vertical surfaces, allowing the cleaning surfactants to begin softening contamination before rinsing.
Because the formulation is pH neutral, the product is safe for regular use on vehicles protected with waxes, sealants or ceramic coatings.
Typical benefits:
✓ Thick clinging snow foam
✓ Safe for waxes and coatings
✓ Helps loosen dirt before contact wash
✓ Ideal for regular maintenance washing
For best results apply using a foam lance from the snow foam and foam lance collection. Follow with a contact wash using a shampoo from the car wash shampoo range and a quality wash mitt.
Specification
| Product Type | Snow foam |
|---|---|
| pH Level | Neutral |
| Application Method | Foam lance |
| Primary Function | Pre-wash cleaning |
| Surface Compatibility | Paint, trim, glass |
| Protection Safe | Wax & coatings |
| Dilution | Foam lance dilution |
How To Use
1) Dilute in foam lance: Add the recommended amount of snow foam concentrate to a foam cannon bottle and top up with water.
2) Apply foam: Cover the vehicle with a thick layer of foam using a foam lance from the snow foam equipment range.
3) Allow dwell time: Leave the foam to dwell for several minutes so the surfactants can begin loosening dirt and contamination.
4) Rinse thoroughly: Rinse the vehicle with clean water before moving on to the contact wash stage.
Notes:
✓ Do not allow foam to dry on the surface
✓ Apply to a cool vehicle out of direct sunlight
✓ Follow with a contact wash for best results