We Say
A compact, approachable rotary with responsive speed control and a flexible five-metre lead for day-to-day polishing work.
The ShineMate EP801 G2+ builds on the compact rotary format with revised gearing, a practical grip arrangement and a straightforward control layout. It is aimed at detailers who want direct rotary polishing without stepping up to an especially large machine.
The double-reduction gearing is designed to provide useful torque at lower operating speeds. Combined with soft start and electronic load sensing, that makes the machine more manageable when moving between cutting and finishing stages.
The machine is listed with a 125mm FlexEdge backing plate, a side handle and a five-metre power cable. That is a useful combination for a general-purpose rotary machine, giving you the freedom to work around the car with fewer interruptions.
For us, the EP801 G2+ makes sense as a practical compact rotary for users already comfortable with direct pad rotation. The machine still requires thoughtful speed selection and heat management, particularly on edges and repainted panels.
Key Features
Power Input800W(1200W stated maximum)
Speed Range700–2500(No-load rpm)
Backing Plate125MM(FlexEdge included)
Description
The ShineMate EP801 G2+ is a compact mains-powered rotary polisher with variable speed and double-reduction gearing.
Its ergonomic design, speed-stabilising electronics and 125mm backing plate make it a practical option for general machine-polishing work. UK and EU plug options are available, so select the appropriate version.
Why you'll love it:
✓ 800W rated input (1200W stated maximum)
✓ 700–2500 rpm speed range
✓ Double-reduction gearing
✓ Electronic load sensing and soft start
✓ 125mm FlexEdge backing plate included
✓ Five-metre power lead
✓ Side handle and wrench listed as accessories
✓ UK and EU plug options
Specification
| Rated Power | 800W |
|---|---|
| Stated Maximum Power | 1200W |
| Speed Range | 700–2500 rpm |
| Backing Plate | 125mm FlexEdge (included) |
| Cable | 5m |
| Weight | 2.2kg |
| Gearing | Double reduction |
| Plug Options | UK / EU |
How To Use
1) Prepare the paintwork:
Wash, decontaminate and dry the vehicle. Inspect the paint and protect sensitive trims and edges as required.
2) Select the right accessories:
Fit a compatible backing plate and pad, then choose a compound or polish suitable for the paint condition. Check the manufacturer's instructions and any kit-specific contents.
3) Start at a controlled speed:
Apply a modest amount of polish to the pad. Begin at low speed to spread the product, with the pad positioned carefully on the panel.
4) Work in manageable sections:
Keep the pad moving evenly with controlled pressure. Monitor paint temperature, pad condition and product residue, especially near edges and raised body lines.
5) Inspect and refine:
Wipe away residue with a clean microfibre cloth and check the result under suitable lighting. Repeat or refine with a less aggressive combination if necessary.
Important Notes:
✓ Rotary machines use direct pad rotation and require suitable technique
✓ Always use the appropriate backing plate, pad and polish combination
✓ Monitor heat and avoid lingering over edges or sensitive paint
✓ Disconnect mains machines or remove batteries before accessory changes
✓ Follow the manufacturer's operating and safety instructions
Product Information
This is an electrical machine polisher, not a chemical preparation. It does not require a chemical Safety Data Sheet for the machine itself.
Choose the correct plug variant. The listed accessories include a side handle, wrench, spare brushes and instructions.
Read the supplied manufacturer instruction manual before use. Follow electrical and battery safety guidance, as applicable, and check the safety information for any polishes or compounds used with the machine.