Koch-Chemie Pressure Sprayer Alkaline 1.5L
- 1.5 L capacity
- For alkaline cleaners
- Manual pressure
Spray at virtually any angle, even upside down. A proper alkaline pressure sprayer that makes awkward cleaning jobs considerably easier.
When you're working your way around a vehicle with an all purpose cleaner or degreaser, constantly squeezing a trigger bottle can become tiresome. The Koch-Chemie Pressure Sprayer Alkaline 1.5L offers a much more convenient way to apply suitable cleaning solutions. Simply pressurise the container by hand and use the adjustable nozzle to deliver a controlled spray, whether you're cleaning lower bodywork, wheel arches or other hard-to-reach areas.
The clever part is its flexible internal suction hose, which allows the sprayer to operate through a full 360 degrees, including upside down. That's particularly useful when working underneath wheel arches or around awkward engine bay components. The EPDM seals are designed for compatible neutral and alkaline cleaners, making it a natural partner for Koch-Chemie Green Star. For a conventional liquid spray rather than foam, this is the model we'd choose. If you need to apply foaming cleaners instead, consider the Koch-Chemie Pressure Foam Sprayer 2L.
Koch-Chemie Pressure Sprayer Alkaline 1.5L is a robust manual pump sprayer developed for controlled application of compatible neutral and alkaline cleaning chemicals. Part of Koch-Chemie's professional Pressure Sprayer Series, it provides a convenient alternative to conventional trigger bottles without requiring electricity or an external compressed air supply.
The sprayer features a flexible internal suction hose that allows operation through 360 degrees, including when the bottle is inverted. This makes it particularly useful for reaching awkward areas such as wheel arches, lower bodywork and suitable engine bay surfaces. An adjustable spray nozzle allows the application pattern to be altered according to the cleaning task.
Equipped with EPDM seals, the sprayer is specifically intended for suitable neutral and alkaline cleaning products. Its nominal 1.5L capacity provides a practical balance between portability and working volume, although the manufacturer's maximum filling mark must always be observed to leave sufficient space for pressurisation. After use, the sprayer should be depressurised and rinsed thoroughly with warm water.
| Capacity | 1.5L nominal |
|---|---|
| Chemical Compatibility | Compatible neutral and alkaline cleaners |
| Operating Method | Manual pressure pump |
| Product Code | 9998284 |
| Seal Material | EPDM |
| Spray Pattern | Adjustable liquid spray |
| Spraying Angle | 360°, including inverted operation |
Read the sprayer's operating instructions and confirm that the chosen cleaner is suitable for use with EPDM seals. Dilute the product according to its manufacturer's instructions and wear any required protective equipment. Do not use acidic or incompatible solvent-based cleaners.
Ensure the sprayer is depressurised before opening. Add the prepared solution without exceeding the marked maximum filling level, then close the container securely. Operate the manual pump according to the supplied instructions to build the required pressure.
Set the adjustable nozzle to the desired spray pattern and apply the cleaner to the intended surface. The flexible suction hose allows the sprayer to be tilted or inverted when reaching difficult areas. Follow the cleaner's instructions for contact time and rinsing, avoiding uncontrolled overspray and never allowing the chemical to dry where prohibited.
After use, safely release the pressure in accordance with the operating instructions before opening the container. Empty the remaining solution appropriately and rinse the sprayer thoroughly with warm water, as recommended by Koch-Chemie. Store clean, depressurised and protected from impact.