Koch-Chemie Pressure Foam Sprayer 2L
- 2 L capacity
- Adjustable foam
- Manual pressure
Proper foam application without getting the pressure washer out. A robust hand-pump foamer with interchangeable nozzles for everything from lighter coverage to a richer blanket of foam.
There's a lot to be said for the convenience of a good pressure foam sprayer. Sometimes you want to tackle a dirty set of wheels, pre-clean a particularly grubby area or apply foam without setting up the pressure washer and all its accessories. The Koch-Chemie Pressure Foam Sprayer 2L makes those smaller cleaning jobs much easier, using a manually pressurised container to deliver foam wherever it's needed.
What we particularly like is the interchangeable nozzle system, which allows you to adjust the foam output to suit the product and cleaning task. The 2L capacity is useful for more involved jobs, while the EPDM seals are intended for compatible neutral and alkaline cleaners. We'd pair it with Koch-Chemie Gentle Snow Foam for appropriate maintenance washing. If you need a conventional liquid spray rather than foam, the Koch-Chemie Pressure Sprayer Alkaline 1.5L is a better choice.
Koch-Chemie Pressure Foam Sprayer 2L is a robust, manually operated pressure foamer designed for applying compatible neutral and alkaline cleaning products. Part of Koch-Chemie's professional Pressure Sprayer Series, it allows cleaning chemicals to be applied as foam without requiring a pressure washer or external compressed air supply.
The sprayer features interchangeable foam nozzles that allow the output to be varied from lighter to more substantial foam, depending on the chosen cleaning product and application. This makes it suitable for targeted vehicle pre-washing and other cleaning tasks where controlled foam application is preferable to a conventional liquid spray.
Its 2L container is equipped with EPDM seals for use with suitable neutral and alkaline cleaning formulations. The sprayer should not be used with acidic products or incompatible chemicals. Koch-Chemie recommends familiarising yourself with the supplied operating instructions before use, following the cleaning chemical manufacturer's directions and depressurising and rinsing the sprayer with warm water after every use.
| Capacity | 2L nominal |
|---|---|
| Chemical Compatibility | Compatible neutral and alkaline cleaners |
| Foam Output | Variable using interchangeable nozzles |
| Nozzle System | Interchangeable foam nozzles |
| Operating Method | Manual pressure pump |
| Product Code | 9998283 |
| Seal Material | EPDM |
Check that your chosen cleaning product is suitable for use in a pressure foamer with EPDM seals. Dilute the cleaner according to its manufacturer's instructions and wear any required protective equipment. Only use compatible neutral or alkaline products.
Ensure the sprayer is depressurised before opening. Add the prepared solution without exceeding the marked maximum filling level. Choose the interchangeable nozzle that provides the required foam consistency, then securely close the sprayer.
Operate the hand pump according to the supplied instructions, then apply an even layer of foam to the intended surface. Follow the cleaning product's recommended contact time and rinsing requirements. Do not allow the cleaning solution to dry where prohibited.
After use, release the remaining pressure safely before opening the container. Empty the remaining cleaning solution appropriately and rinse the sprayer thoroughly with warm water, as recommended by Koch-Chemie. Store clean and depressurised, protecting the container from impact.