CarPro TarX Tar & Adhesive Remover
- Dissolves tar
- Lifts adhesive residue
- Citrus-based solvent
Those stubborn black tar spots that ordinary washing won't shift? CARPRO TarX breaks them down chemically, saving you from scrubbing away at your paintwork.
Tar spots are one of those things that can make an otherwise clean car look grubby, particularly around the lower doors, sills and behind the wheels. They're also surprisingly difficult to remove with ordinary shampoo. CARPRO TarX makes the job much easier, using fast-acting solvent-based cleaning chemistry to soften and dissolve the deposits rather than relying on aggressive rubbing.
What we like about TarX is how quickly it gets to work. Spray it onto a dry, contaminated panel and you'll often see the tar beginning to soften and run after a short dwell. The formulation also targets rubber marks and sticky residues, making it useful for more than just the usual road tar. It does contain active solvents, though, so we'd always check compatibility with sensitive finishes and avoid unnecessarily long contact times.
We particularly recommend TarX as part of a proper paintwork decontamination process before polishing or applying fresh protection. It deals with the sticky contamination that iron removers can't tackle, making it an excellent companion to CARPRO IronX. If you'd prefer a product combining both cleaning actions, CARPRO TriX is another option. Just remember to finish with a thorough shampoo wash to remove the dissolved contamination and cleaning residues.
CARPRO TarX Tar & Adhesive Remover is a fast-acting automotive decontamination cleaner formulated to dissolve stubborn road tar, rubber deposits and sticky contamination from compatible vehicle surfaces. Its solvent-based cleaning action softens bonded residues, allowing them to be removed with reduced mechanical agitation.
CARPRO formulates TarX using naturally derived active ingredients without chlorinated solvents. The product begins acting on contamination shortly after application and is designed for use on most compatible automotive exterior surfaces. It is particularly effective against tar deposits that cannot be removed through ordinary shampoo washing.
TarX is applied directly to a dry surface and normally allowed to react for two to three minutes. Stubborn deposits may be gently worked with a suitable brush or cloth where necessary. CARPRO advises avoiding contact times exceeding seven to ten minutes and completing the treatment with a thorough wash using car shampoo.
As part of a complete decontamination process, TarX addresses organic and sticky residues, while an iron fallout remover such as CARPRO IronX targets embedded ferrous particles. Both types of contamination may need to be removed before machine polishing or ceramic coating application.
TarX is a solvent-based cleaner and should not be assumed compatible with every plastic, rubber, adhesive, protective coating or refinished surface. Test unfamiliar finishes before use and follow the current product label.
| Application | Spray onto dry surfaces |
|---|---|
| Chemical Basis | Naturally derived solvent-based ingredients |
| Cleaning Strength |
|
| Dilution | Ready to use |
| Maximum Contact Time | Avoid exceeding 7–10 minutes |
| Primary Application | Tar and sticky residue removal |
| Recommended Dwell | 2–3 minutes |
| Removes | Road tar, rubber marks and insect residue |
Ensure the surface is cool and dry, away from direct sunlight. Remove loose dirt beforehand where necessary and test an inconspicuous area to confirm material compatibility.
Shake the bottle thoroughly, then spray TarX directly onto the dry, contaminated surface. Apply enough product to cover the tar spots or sticky residue.
Leave TarX to work for approximately two to three minutes. Allow the solution to soften and dissolve the contamination, but do not let it dry or remain on the surface for longer than the manufacturer's maximum guidance of seven to ten minutes.
Where necessary, gently work remaining residue with a suitable soft brush or microfibre cloth. Avoid excessive pressure and repeat the treatment rather than scrubbing aggressively.
Thoroughly wash the treated area using a suitable car shampoo to remove dissolved contamination and TarX residues. Rinse well with clean water and inspect the finish.
CARPRO TarX is a solvent-based automotive tar and adhesive cleaner. Naturally derived ingredients do not mean that the concentrate is free from chemical hazards. Handle the product according to the current label and Safety Data Sheet.
Safety precautions:
✓ Use in a well-ventilated area
✓ Wear suitable chemical-resistant gloves and eye protection
✓ Avoid direct contact with skin and eyes
✓ Avoid breathing spray mist or vapours
✓ Keep away from heat and ignition sources
✓ Do not mix with other cleaning chemicals
✓ Test sensitive materials before application
✓ Keep securely stored out of reach of children
Safety Data Sheet:
Refer to the current CARPRO TarX Safety Data Sheet for product-specific hazard classifications, first-aid measures, storage and handling instructions. Ensure the document corresponds to the formulation supplied in the UK.