CarPro Hydr02 Concentrate
- Spray and rinse
- Silica-based protection
- No buffing required
Spray it on, rinse it off and watch the water disappear. CARPRO HydrO2 makes protecting your entire car remarkably quick and easy.
HydrO2 is one of those products that really shows how far paint protection has come. Rather than spending ages applying and buffing off a traditional wax or sealant, you simply spray it onto a freshly washed, wet car and rinse. The resulting water repellency is impressive, with water forming tight beads and running off the surface with very little encouragement. You also get a noticeable boost in gloss and slickness without the usual application work.
What makes the concentrate particularly appealing is its value. Unlike the ready-to-use HydrO2 Lite, you dilute this version yourself, with CARPRO recommending a minimum ratio of 1:6. A relatively small bottle therefore produces a useful amount of sprayable sealant. It's an excellent option if you wash your car regularly, maintain multiple vehicles or simply prefer keeping concentrated products on the shelf.
The one thing we'd emphasise is that HydrO2 needs to be used properly. It's not a product to spray over an entire car and leave sitting while you do something else. Work on a small section, use a light mist and rinse thoroughly within 30 seconds. Follow that routine and it's a brilliantly convenient way to protect paintwork, glass, wheels and exterior trim. It can also be used over an existing CARPRO CQUARTZ coating to refresh its water-repellent finish.
CARPRO HydrO2 Concentrate is a concentrated silica-based spray sealant designed to create a hydrophobic protective layer through a simple spray-on, rinse-off application. Its formulation combines nano glass fibre technology and silicon polymers to provide water repellency, enhanced gloss, surface slickness and resistance to environmental contamination.
HydrO2 is applied to clean, wet vehicle surfaces and activated during the rinsing process, eliminating the need for conventional spreading and buffing during the initial application. The treatment can be used on compatible hard exterior surfaces, including paintwork, glass, wheels and trim, providing a protective finish across multiple materials in a single washing session.
The sealant may be used independently or as a maintenance product over existing CARPRO CQUARTZ ceramic coatings. CARPRO also identifies chemical and UV resistance among its protective properties and advertises durability of up to six months or more under suitable conditions. Actual longevity depends on surface preparation, exposure, washing frequency and maintenance.
As a concentrate, HydrO2 requires dilution with water before use. CARPRO Global specifies a minimum dilution of one part product to six parts water (1:6). The diluted solution should be sprayed sparingly onto a small section of the wet vehicle and thoroughly rinsed within 30 seconds, including any surrounding areas affected by overspray.
For convenient application without dilution, CARPRO also offers a ready-to-use HydrO2 Lite formulation.
| Application | Spray onto wet surface and rinse |
|---|---|
| Beading |
|
| Dilution | Minimum 1:6 (product to water) |
| Durability | 3 months+ (PolishedBliss average) |
| Maximum Contact Time | 30 seconds before rinsing |
| Protection Type | Silica-based spray sealant |
| Slickness |
|
Thoroughly wash the vehicle to remove dirt and contamination, then rinse away all shampoo residue. Leave the surfaces wet and ensure the vehicle is cool and out of direct sunlight.
Mix one part CARPRO HydrO2 with at least six parts water in a suitable spray bottle. For example, combine 50ml of HydrO2 with 300ml of water to prepare a 1:6 solution.
Lightly spray the diluted solution onto a small section of the wet vehicle. Use only enough product for even coverage, avoiding excessive application and unnecessary overspray.
Thoroughly rinse the treated section within 30 seconds of spraying. Ensure all treated surfaces and any neighbouring areas affected by overspray are completely rinsed before moving to the next section.
Repeat the application and rinsing process around the vehicle, working section by section. Once complete, dry thoroughly and finish with a light wipe using a fresh, clean microfibre towel.
CARPRO HydrO2 Concentrate is a chemical surface-protection product. Avoid contact with skin and eyes, use suitable protective gloves and eye protection when handling the concentrate, and keep out of reach of children. Do not apply to hot surfaces or in direct sunlight.
Follow the current product label and the Safety Data Sheet supplied for the UK formulation. Product-specific hazard classifications and first-aid measures should be taken from that document.