We Say
Deep satin-black tyres, impressive water repellency and protection that lasts. CARPRO DarkSide gives you that freshly dressed look without the excessive shine.
There's nothing quite like a freshly detailed car with beautifully finished tyres, but not everyone wants that wet, glossy look. CARPRO DarkSide is one of our favourites for achieving a rich, natural-looking satin finish. It darkens the rubber beautifully without making it look overly shiny, and its highly concentrated silicone-based formula offers much more than a quick cosmetic improvement.
DarkSide contains 60% polydimethylsiloxane (PDMS), giving it excellent hydrophobic properties along with resistance to UV exposure and cleaning chemicals. Once applied, water beads readily on the surface and road grime is less inclined to stick, helping tyres stay cleaner between washes. CARPRO claims up to three months of durability, which is impressive for a tyre dressing, although the results will naturally depend on how the car is used and how thoroughly the rubber is prepared.
Preparation makes a big difference. We'd always start by giving the tyres a proper clean with CARPRO ReTyre to remove old dressings, browning and ingrained dirt. Once dry, DarkSide spreads easily using a foam applicator or the dedicated DarkSide Tyre Brush, which works particularly well around raised lettering and textured sidewalls. Give it an hour or two to dry without water contact and you're left with a smart, understated finish that lasts considerably longer than a typical quick tyre dressing.
Key Features
Description
CARPRO DarkSide Tyre Dressing is a highly concentrated, ready-to-use tyre and rubber sealant that provides a rich satin-black finish with outstanding water repellency. Its advanced formula contains 60% polydimethylsiloxane (PDMS), helping protect rubber against UV exposure, road grime and chemical contamination.
Unlike conventional dressings that may need frequent reapplication, DarkSide offers manufacturer-claimed durability of up to three months. Its hydrophobic, self-cleaning properties help tyres maintain their dark appearance while making regular cleaning easier.
Why you'll love it:
✓ Long-lasting tyre and rubber sealant
✓ Rich, natural-looking satin-black finish
✓ Highly concentrated 60% PDMS formula
✓ Excellent water beading and repellency
✓ Helps reduce road grime adhesion
✓ UV-resistant protective formulation
✓ Resistant to cleaning chemicals
✓ Up to 3 months of manufacturer-claimed durability
✓ Low-VOC formulation
✓ Straightforward applicator-based application
✓ Suitable for textured tyre sidewalls
✓ Ready to use without dilution
✓ Ideal for maintaining a smart satin tyre finish
For the best results, thoroughly clean the rubber with CARPRO ReTyre before applying DarkSide. Removing old dressing residues and accumulated contamination gives the protective treatment a cleaner surface to work with.
Apply using a suitable foam or microfibre applicator. For improved coverage around lettering and textured sidewalls, the CARPRO DarkSide Tyre Dressing Brush is an excellent companion. Leave the dressing undisturbed and protected from water for one to two hours after application.
Specification
| Adds Protection | Yes, hydrophobic, UV and chemical resistance |
|---|---|
| Application Method | Foam, microfibre or dedicated tyre applicator |
| Chemical Basis | Silicone-based, 60% PDMS |
| Darkening Effect | Yes, satin black |
| Dilutable | No, ready to use |
| Durability | Up to 3 months |
| Finish | Satin black |
| Low VOC | Yes, according to CARPRO |
| Primary Application | Tyre sidewall protection and dressing |
| Shine Level |
|
| Suitable Surfaces | Compatible exterior tyre and rubber surfaces |
| Water Contact | Avoid for 1–2 hours after application |
How To Use
1) Clean the tyres:
Thoroughly clean the tyre sidewalls using CARPRO ReTyre or another suitable rubber cleaner. Remove accumulated dirt, browning and previous dressing residues, then rinse completely.
2) Dry the rubber:
Allow the tyre sidewalls to dry thoroughly. DarkSide should be applied to clean, dry rubber, away from direct sunlight.
3) Apply DarkSide:
Dispense two or three squirts onto a suitable tyre dressing applicator or the CARPRO DarkSide Brush. Work the product evenly across the tyre sidewall, including textured areas and raised lettering.
4) Check the coverage:
Ensure the entire sidewall has an even application. Remove any excessive product with a suitable applicator or clean microfibre cloth, keeping dressing away from the tread and braking components.
5) Allow to dry:
Leave DarkSide undisturbed and avoid contact with water for one to two hours after application.
Important Notes:
✓ Ready to use; do not dilute
✓ Clean and dry tyres thoroughly before application
✓ Apply to cool surfaces away from direct sunlight
✓ Use two or three squirts per initial applicator loading
✓ Spread evenly over the tyre sidewall
✓ Avoid tyre treads and braking components
✓ Remove excessive dressing before use
✓ Keep treated tyres away from water for 1–2 hours
✓ Wear suitable protective gloves
✓ Follow the current product label and safety instructions
Safety Data
CARPRO DarkSide is a silicone-based tyre and rubber sealant. Although described by CARPRO as a low-VOC formulation, the concentrate still requires careful handling. Available CARPRO safety documentation identifies an aspiration hazard if swallowed.
Important safety information:
✓ Avoid contact with skin and eyes
✓ Wear suitable protective gloves
✓ Use in a well-ventilated area
✓ Avoid breathing vapours or spray mist
✓ Do not swallow the product
✓ If swallowed, seek immediate medical assistance and do not induce vomiting
✓ Keep away from heat and ignition sources
✓ Do not mix with other chemicals
✓ Keep securely stored out of reach of children
✓ Avoid unnecessary release into the environment
✓ Follow the current product label and Safety Data Sheet
Safety Data Sheet:
Refer to the current CARPRO DarkSide Safety Data Sheet for full hazard classifications, first-aid measures and safe handling instructions. Ensure the document corresponds to the formulation supplied in the UK.