Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

We Say

The latest generation of a detailing favourite. CQUARTZ UK 4.0 brings a glossier, slicker finish and long-term protection, with more time to get the application just right.

CARPRO CQUARTZ UK has been one of the most recognisable ceramic coatings in the detailing world for years, and UK 4.0 builds on what made the earlier versions so popular. You still get the strong water repellency and protective finish that CQUARTZ is known for, but this generation has been reformulated for increased slickness, better water-spot resistance and a more forgiving application. CARPRO also now quotes durability of up to three years, which makes it a compelling option for anyone looking for proper long-term paint protection.

One of the biggest changes is the application. Anyone familiar with UK 3.0 will remember how important it was to keep an eye on the flash time. UK 4.0 gives you a more relaxed working window, helping reduce the pressure to buff immediately and making it easier to achieve a consistent finish. You still need to work carefully and inspect for high spots, but that extra time is a welcome improvement, particularly when coating a whole vehicle.

As always, preparation is where a good coating application really begins. We'd thoroughly decontaminate the paintwork using products such as CARPRO IronX, correct any defects and finish with CARPRO Eraser to remove polishing oils. Have several clean CARPRO 2Face Towels ready for levelling. Take your time over those stages and UK 4.0 should reward you with a beautiful finish that's noticeably easier to maintain.

Key Features

Durability UP TO 3 YEARS (Manufacturer stated potential)
Flash Time 7–10 MIN (Typical application guidance)
Full Cure 7 DAYS (Full hardness and chemical resistance)

Description

CARPRO CQUARTZ UK 4.0 is a fourth-generation ceramic coating developed for long-term protection of automotive paintwork. Its advanced blend of hybrid synthetic polymers has been reformulated to improve surface slickness, gloss, water-spot resistance and durability compared with previous CQUARTZ UK formulations.

The coating produces a hydrophobic protective finish that reduces water retention and helps limit the adhesion of everyday environmental contamination. CARPRO specifies real-world durability of up to three years under suitable preparation and maintenance conditions. Actual longevity depends on exposure, washing methods and ongoing care.

UK 4.0 features a revised application process with slower drying and a more manageable working window. The manufacturer's instructions specify spreading the coating in a cross-hatch pattern over approximately 60 × 60cm sections, allowing it to flash for seven to ten minutes before removing the residue with a short-pile microfibre towel. A final wipe with a plush microfibre towel is recommended to achieve a uniform finish.

Additional layers may be applied after one hour at temperatures above 20°C, or after two hours below 20°C. The coating should be kept free from standing water during the first 24 hours, while full hardness and chemical resistance develop over seven days. CARPRO recommends the use of CARPRO Release after three hours where additional rain protection is needed during initial curing.

Specification

More Information
Application Microfibre coating applicator
Application Area Approximately 60 × 60cm
Durability Up to 3 years
Flash Time Typically 7–10 minutes
Full Cure 7 days
Layering After 1–2 hours, temperature dependent
Protection Type Hybrid ceramic coating
Initial Water Protection Avoid standing water for 24 hours

How To Use

  1. Wash and decontaminate

    Thoroughly wash the vehicle and remove bonded contamination using suitable products such as CARPRO IronX, TarX and detailing clay where required. The paintwork must be completely clean before coating.

  2. Polish and prepare

    Correct any paint defects before coating, then wipe down thoroughly with CARPRO Eraser to remove polishing oils and residues. Make sure the surface is cool, fully dry and free from silicone or remaining contamination. Work in a clean, well-ventilated area away from direct sunlight.

  3. Apply the coating

    Apply a line of CQUARTZ UK 4.0 to a suitable microfibre-wrapped coating applicator. Spread evenly across a section measuring approximately 60 × 60cm using overlapping cross-hatch passes, ensuring a thin, uniform film.

  4. Allow to flash and buff

    Allow approximately seven to ten minutes for the coating to flash, adjusting to the working conditions and observing how the product behaves. Gently level with a clean, short-pile microfibre towel, then finish with a plush towel. Inspect carefully under good lighting to ensure no high spots remain.

  5. Apply additional layers if required

    If applying another layer, CARPRO specifies waiting at least one hour above 20°C or two hours below 20°C. Repeat the application and levelling process, ensuring the previous layer has had sufficient time before continuing.

  6. Protect during curing

    Keep standing water off treated surfaces for the first 24 hours and remove any water promptly. CARPRO Release may be applied after three hours to provide additional protection against rain. Allow seven days for the coating to develop full hardness and chemical resistance, avoiding washing chemicals during this period.

Safety Data

Danger: CARPRO CQUARTZ UK 4.0 contains flammable solvents. The manufacturer identifies hazards including serious eye irritation, aspiration danger if swallowed and potential organ damage from prolonged or repeated exposure.

Work in a well-ventilated area and wear suitable chemical-resistant gloves, eye protection and respiratory protection appropriate to the exposure. Keep away from heat, sparks and flames. Avoid skin and eye contact, do not inhale vapours and keep out of reach of children. If swallowed, seek immediate medical assistance and do not induce vomiting.

Refer to the current product label and Safety Data Sheet for complete hazard classifications and safe handling requirements. Manufacturer information: CARPRO CQUARTZ UK 4.0.

Customer Reviews