We Say
When tar has bonded to the paint, more scrubbing is the wrong answer. Use the right solvent and let it do the difficult part.
Little black tar spots tend to build up where you least want them, along the sills, behind the wheels and across the lower doors. They can feel almost welded to the paint. Trying to shift them with your wash mitt risks dragging the contamination around instead of removing it.
BETTER BetTAR is the product we'd reach for once the usual wash has removed loose dirt but left those stubborn deposits behind. It's a ready-to-use solvent cleaner, designed to soften tar and adhesive residue so that you can lift it away with minimal rubbing. It's useful for the awkward traces left by old stickers and badges too.
The important distinction is that this is a targeted decontamination product, not something for every weekly wash. Work on cool, fully cured compatible surfaces, test first and keep it away from vulnerable plastics and fresh paint repairs. We would also expect to refresh wax or sealant protection on treated areas afterwards.
Key Features
FormatREADY TO USE(No dilution required)
TargetsTAR & GLUE(Bonded sticky contamination)
Sizes1L / 5L(Enthusiast and workshop)
Description
BETTER BetTAR Tar & Glue Remover A solvent-based cleaner for the difficult tar spots and adhesive residue that normal shampoo cannot reliably shift. Use as a targeted step after washing, before final inspection and protection.
Why you'll love it:
✓ Ready-to-use tar and adhesive remover
✓ Softens stubborn road tar and sticky residue
✓ Useful on compatible fully cured automotive paintwork
✓ Helps reduce the need for aggressive rubbing
✓ Available in 1 litre and 5 litre sizes
Specification
| Product Type | Solvent-based tar and glue remover |
|---|---|
| Dilution | Use neat; do not dilute |
| Typical Uses | Road tar, adhesive and tyre transfer |
| Surface Suitability | Fully cured, compatible automotive paintwork |
How To Use
1) Clean first:
Wash and rinse away loose dirt so you can see the remaining contamination.
2) Check compatibility:
Work on a cool surface, out of direct sun. Test an inconspicuous area first.
3) Apply carefully:
Apply to affected spots and allow a short dwell, without letting the solvent dry.
4) Lift the residue:
Gently remove softened contamination with a clean colourfast microfibre cloth. Repeat instead of scrubbing.
5) Finish properly:
Remove remaining residue, wash or rinse the treated area and restore protection as required.
Safety Data
Flammable solvent product. Follow the product label and Safety Data Sheet, use in a ventilated area and avoid heat or ignition sources.