We Love

SCHOLL Concepts S20 Black

From £22.00
Heavy cut one-step compound for all paint types. Buy online and earn loyalty points as you shop.
SKU
SCS20B00000000000
How many loyalty points will I earn?

If you have created an account and are signed in, you will earn 1 point per whole £ you spend (e.g. spending £9.50 earns 9 points). The redemption value of each point you earn will vary between £0.05 and £0.15 depending on your rolling annual spend; see our loyalty points page for details.

We Say

SCHOLL Concepts S20 Black is a relatively recent addition to the SCHOLL Concepts line up of compounds and polishes and, like its forbears, uses the same one-step diminishing abrasive technology to great effect, albeit with the addition of a neat party trick; extra cut and extra gloss. These two parameters are usually mutually exclusive, but thanks to further development of their intelligent Powder Technology (iPT) concept, SCHOLL Concepts have made the impossible possible. SCHOLL Concepts S20 Black cuts like an aggressive cutting compound but finishes down like an ultra-fine finishing polish; as long as you select the right pad for the job you will always produce a last step product ready finish in just a single polishing step (you may still need to perform multiple sets on some panels, but you won't ever need to revert to a multi-stage refining process). This makes it, by quite some margin, the best one-step compound on the market right now, almost to the point where it could arguably be called the Holy Grail of polishes. By hand or machine, it delivers outstanding results.

Key Features

Cut Level 8/10 (Compared To Others)
Filling Power 0/10 (Compared To Others)
Gloss Level 10/10 (Compared To Others)

Description

SCHOLL Concepts S20 Black is a one-step high performance cutting compound designed to cover a wide range of correction duties on all common paint systems, including modern ceramic nano-particle and scratch-resistant clearcoats, and conventional paint finishes too. SCHOLL Concepts S20 Black uses state of the art high-purity aluminium oxide intelligent Powder Technology (iPT) abrasives that break down quickly in use, forming a progressively finer polishing residue. As a result, the level of cut on offer diminishes quickly from that of a moderate strength cutting compound to that of an ultra-fine finishing polish, meaning that it corrects and refines the finish in a single step. By choosing an appropriate pad for the paint type in question, the overall level of cut can be carefully controlled, meaning that perfect results can be obtained every time. To aid this further, SCHOLL Concepts S20 Black features new easy clean lubricants that optimise its efficiency and make it easy to buff off, while its filler-free formula ensures that defect removal is permanent rather than temporary.

Specification

More Information
Adds Protection No
Chemical Basis Water-based
Contains Abrasive Particles Yes (diminishing)
Contains Fillers And Glazing Oils No
Cut Level
8
Filling Power
0
Gloss Level
10
Suitable For Hand Use Yes
Suitable For Hard Paints Yes
Suitable For Intermediate Paints Yes
Suitable For Machine Use Yes
Suitable For Soft Paints Yes

How To Use

You can apply SCHOLL Concepts S20 Black by hand or machine, although for best results we recommend the latter. By hand, apply SCHOLL Concepts S20 Black to freshly decontaminated paint using a SCHOLL Concepts Polishing Puck. Only 3-4 pea-sized drops of product are required per 12" x 12" area, and these should be worked in firmly and evenly until only an oily residue remains. This residue should then be buffed off carefully using a PB Super Buffing Towel. For best results using a dual action polisher, apply SCHOLL Concepts S20 Black to freshly decontaminated paint using either: (i) a SCHOLL Concepts Spider Cutting Pad (if heavy correction is required on hard paint types); (ii) a SCHOLL Concepts Spider Polishing Pad (if moderate correction is required on hard paint types, or heavy correction is required on intermediate paint types); (iii) a SCHOLL Concepts Spider Finishing Pad (if light correction is required on hard or intermediate paint types, or moderate correction is required on soft paint types), or; (iv) a SCHOLL Concepts SOFTouch Waffle Pad (if light correction is required on soft paint types). Only 3-4 pea-sized drops of product are required per 18" x 18" area, and these should be worked in thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action polishers), applying moderate pressure for the first 90 seconds or so, and then progressively lighter pressure for a further 90 seconds or so, until only an oily residue remains. This residue should then be buffed off carefully using a PB Super Buffing Towel.

Reviews

Close Close