RUPES Mille Coarse Gel Compound

From £13.00
Heavy cutting compound for all paint types. Buy online and earn loyalty points as you shop.
In stock
SKU
RUMCOAGEL00000000

We Say

RUPES Mille Coarse Gel Compound is the perfect product to use in situations where maximum cutting power is required for major paint correction work when using gear-driven dual action polishers. Formulated specifically for use with the RUPES LK 900E BigFoot Mille and the RUPES Mille Coarse Foam Polishing Pad, it offers a number of subtle benefits over rival cutting compounds. Firstly, it removes severe defects in intermediate and hard paint types quickly and easily, without prematurely breaking down. Secondly, it does this without drying out too quickly or generating an excessive amount of polishing dust. Thirdly, it buffs off cleanly and leaves paint feeling very smooth, which makes it a pleasure to use.

Key Features

Cut Level 9/10 (Compared To Others)
Filling Power 0/10 (Compared To Others)
Gloss Level 8/10 (Compared To Others)

Description

RUPES Mille Coarse Gel Compound is a highly abrasive water-based compound designed to be used in conjunction with short-throw gear-driven dual action polishers. It works by using precision-milled aluminium oxide particles to cut away a thin layer of paint. As a result, it is able to remove severe paint defects, including deep scratches, heavy oxidation and stains caused by acid etching. Unlike many cutting compounds, it also finishes down well to give a sharp, high gloss finish that needs only minor refinement with a finishing polish afterwards. Specially formulated lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.

Specification

More Information
Suitable For Soft Paints No
Suitable For Machine Use Yes
Suitable For Intermediate Paints Yes
Suitable For Hard Paints Yes
Suitable For Hand Use No
Contains Abrasive Particles Yes (diminishing)
Chemical Basis Water-based
Contains Fillers And Glazing Oils No
Cut Level
9
Adds Protection No
Gloss Level
8

How To Use

RUPES Mille Coarse Gel Compound should only be applied using the RUPES LK 900E BigFoot Mille or other gear-driven dual action polishers. For best results, it should be applied to freshly decontaminated paint using either a RUPES Mille Coarse Foam Polishing Pad or a RUPES BigFoot Coarse Wool Polishing Pad. Only 3-4 pea-sized drops of product are required per 18 x 18 area, and these should be worked in thoroughly at 400-500 revolutions per minute (speed 4-5 on most gear-driven dual action polishers) until only a hint of residue remains. This residue should then be buffed off carefully using a PB Super Buffing Towel.

Reviews

Close Close