Many car care product manufacturers follow the same practice when it comes to meeting current health and safety laws, which is to meet the required standards at the lowest possible cost. This results in products being safe (according to the law), but not necessarily as safe as they could be (according to the latest health and safety research). Nanolex are different in this respect. Their chemists are more cautious, and prefer to use the safest possible chemicals whenever possible, even if this means that the end product is more expensive as a result. Nanolex Tar Remover is a good example of this; instead of comprising aromatic solvents, which are inexpensive and work well but are harmful to human health, it comprises dearomatized solvents that cost more to produce but which are far less toxic and perform equally as well. Cost versus safety; the decision is yours!
|Maximum Dwelling Time||2 minutes|
|Removes Inorganic Contaminants||No|
|Strips Sealants And Waxes||Yes|
|Safe For All Wheel Types||Yes|
|Removes Organic Contaminants||Yes|
Nanolex Tar Remover is an intensive spirit-based cleaner and should be used neat. For best results, it should be applied to dry surfaces (if conditions dictate it can be applied to wet surfaces, but note that its efficacy will be reduced). Working on one panel at a time, spray Nanolex Tar Remover on liberally and allow 1-2 minutes for it to work. Then take a PB Disposable Towel and wipe the panel down gently to remove any stubborn nibs of contamination. Once the whole car is done, discard the towel (don't attempt to wash it, because the residual odour will contaminate your washing machine), rinse the car down thoroughly and proceed to the next stage of the decontamination process (the removal of iron-based contaminants using an iron-dissolving cleaner).