Nanolex Matte Final Finish

From £15.50
Fully synthetic quick detailing spray for matt finishes. Buy online and earn loyalty points as you shop.
How many loyalty points will I earn?

If you have created an account and are signed in, you will earn 1 point per whole £ you spend (e.g. spending £9.50 earns 9 points). The redemption value of each point you earn will vary between £0.05 and £0.15 depending on your rolling annual spend; see our loyalty points page for details.

We Say

Given that matt effect finishes are easily damaged by conventional quick detailers (which are almost always designed to enhance gloss), Nanolex have formulated an easy to use oil-free quick detailing spray that removes fingerprints and water spots without degrading the matt effect or stripping existing layers of synthetic protection. In our experience, this makes Nanolex Matte Final Finish an essential maintenance product for matt-finished cars and motorcycles. We also use it to clean and maintain our matt-finished mountain bikes to great effect too!

Key Features

Beading 7/10 (Compared To Others)
Durability 3 Weeks + (Average Value)
Slickness 9/10 (Compared To Others)


Conventional quick detailers should not be used on matt paint finishes and matt vinyl wraps, as they contain oils and other gloss enhancing agents that can permanently degrade the matt effect. Nanolex Matte Final Finish is a fully synthetic quick detailing spray that removes fingerprints and water spots from matt paint finishes and matt vinyl wraps without damaging the delicate matt effect. Nanolex Matte Final Finish is intended for use after routine washing and drying, and is designed to help restore and maintain previous layers of synthetic protection.


More Information
Adds Protection Yes
Anti-Static No
Dilutable No
Durability 3 weeks +
Enhances Gloss No
Recommended For Matt finishes (painted and wrapped)
Trim-Safe Yes

How To Use

For best results, lightly mist Nanolex Matte Final Finish over a single panel at a time (it is safe for use on all matt effect surfaces) and immediately wipe it down to spread a thin, even film of product using a Nanolex Microfiber Buffing Towel. Then refold your towel, and buff the panel down carefully to fully remove the film and reveal a uniform streak-free finish. You may need to repeat the process several times in order to fully remove stubborn water spots; do not scrub the finish under any circumstances, as this can damage the matt effect.


Close Close