Skip to content
FREE UK Delivery on orders over £75*
FREE UK Delivery on orders over £75*

Menzerna Super Finish 3500 (PO106FA)

£13.00




We Say

Marred ceramic nano-particle and scratch-resistant finishes can be quite difficult to correct, even if the defects appear to be very light. Why? Because such paints are physically very hard, and normal finishing polishes aren't always robust enough to cut them effectively. Menzerna Super Finish 3500 (PO106FA) solves this problem by swapping out fragile aluminium oxide particles for robust precision-milled diminishing abrasives. These also work well on conventional intermediate and hard paint finishes without prematurely breaking down, meaning that you'll make good progress in no time at all.

Key Features

Cut Level4/10(Compared To Others)
Filling Power0/10(Compared To Others)
Gloss Level10/10(Compared To Others)

Description

Menzerna Super Finish 3500 (PO106FA) is a versatile finishing polish designed to remove light to moderate paint defects, including heavy wash marring and swirl marks. It's ideal for light correction work on modern ceramic nano-particle and scratch-resistant clearcoats, and produces great results on intermediate and hard conventional paint finishes too. It works by using robust precision-milled abrasives to cut away a very thin layer of paint. Long-lasting lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.

Specification

More Information
Adds Protection No
Chemical Basis Water-based
Contains Abrasive Particles Yes (diminishing)
Contains Fillers And Glazing Oils No
Cut Level
4
Gloss Level
10
Suitable For Hand Use Yes
Suitable For Hard Paints Yes
Suitable For Intermediate Paints Yes
Suitable For Machine Use Yes
Suitable For Soft Paints No

How To Use

You can use Menzerna Super Finish 3500 (PO106FA) by hand or machine, although for best results we recommend the latter. By hand, it should be applied to freshly decontaminated paint using a SCHOLL Concepts Polishing Puck. Only 1-2 pea-sized drops of product are required to polish a 12 x 12 area, and these should be worked in as firmly and evenly as possible until only an oily residue remains. This residue should then be buffed off using a PB Super Buffing Towel. For best results using a dual action polisher, Menzerna Super Finish 3500 (PO106FA) should be applied to freshly decontaminated paint using a Gyeon Q²M Eccentric Polishing Pad. Only 3-4 pea-sized drops of product are required per 18 x 18 area, and these should be worked in thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action polishers) until only a thin oily residue remains. This residue should then be buffed off carefully using a PB Super Buffing Towel.

Reviews