We Love

Menzerna Medium Cut Polish 2500 (PO203)

From £10.50
Light cutting compound for softer paint types. Buy online and earn loyalty points as you shop.
SKU
MZMC2500000000000
How many loyalty points will I earn?

If you have created an account and are signed in, you will earn 1 point per whole £ you spend (e.g. spending £9.50 earns 9 points). The redemption value of each point you earn will vary between £0.05 and £0.15 depending on your rolling annual spend; see our loyalty points page for details.

We Say

One of the biggest problems that can trip you up when correcting defects in soft paint finishes is micromarring. This term refers to a faint pattern of tightly defined swirl marks caused by unbroken down abrasives scouring the surface of the paint. It typically appears if you use a compound that is too robust for the hardness of the paint you are working on, or if you fail to work an appropriate compound for long enough. Either way, the trick to avoiding micromarring on soft paint finishes is to use a compound with fragile abrasives that break down quickly and easily. Menzerna Medium Cut Polish 2500 (PO203) fits this bill perfectly.

Key Features

Cut Level 5/10 (Compared To Others)
Filling Power 0/10 (Compared To Others)
Gloss Level 9/10 (Compared To Others)

Description

Menzerna Medium Cut Polish 2500 (PO203) is a light cutting compound designed to remove minor paint defects. It works by using precision-milled aluminium oxide particles to cut away a thin layer of paint. These particles are relatively fragile, and break down quickly and easily during use. This makes Menzerna Medium Cut Polish 2500 (PO203) ideal for general correction work on soft paint finishes, where micromarring can otherwise be a problem if more robust abrasives are used. Long-lasting lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.

Specification

More Information
Adds Protection No
Chemical Basis Water-based
Contains Abrasive Particles Yes (diminishing)
Contains Fillers And Glazing Oils No
Cut Level
5
Filling Power
0
Gloss Level
9
Suitable For Hand Use Yes
Suitable For Hard Paints Yes
Suitable For Intermediate Paints Yes
Suitable For Machine Use Yes
Suitable For Soft Paints Yes

How To Use

Menzerna Medium Cut Polish 2500 (PO203) can be applied equally well by hand or dual action machine. By hand, it should be applied to freshly decontaminated paint using either a Lake Country Hydro-Tech Cutting Hand Pad or a Lake Country Hydro-Tech Polishing Hand Pad. Only 1-2 pea-sized drops of product are required to polish a 12" x 12" area, and these should be worked in as firmly and evenly as possible until only an oily residue remains. This residue should then be buffed off using a PB Super Buffing Towel. For best results using a dual action polisher, Menzerna Medium Cut Polish 2500 (PO203) should be applied to freshly decontaminated paint using a Lake Country Hydro-Tech Polishing Pad. Only 3-4 pea-sized drops of product are required per 18" x 18" area, and these should be worked in thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action polishers) until only a thin oily residue remains. This residue should then be buffed off carefully using a PB Super Buffing Towel.

Reviews

Close Close