3M Performance Finish

£19.50
Low cost entry level easy to use synthetic paint sealant. Buy online and earn loyalty points as you shop.
6 in Stock
SKU
3MPERF04730000001
How many loyalty points will I earn?

If you have created an account and are signed in, you will earn 1 point per whole £ you spend (e.g. spending £9.50 earns 9 points). The redemption value of each point you earn will vary between £0.05 and £0.15 depending on your rolling annual spend; see our loyalty points page for details.

We Say

3M Performance Finish is a high performance synthetic paint sealant that vastly outperforms the low quality sealants and waxes typically found in car parts stores. Like most synthetic paint sealants, it offers limited richness and gloss, but more than makes up for this in terms of the reflectivity, flake pop and slickness it imparts. Easy to apply and buff off, we recommend using 3M Performance Finish as a durable basecoat for subsequent applications of 3M Quick Wax.

Key Features

Beading 6/10 (Compared To Others)
Durability 2 Months + (Average Value)
Slickness 8/10 (Compared To Others)

Description

3M Performance Finish is a polymer-based synthetic paint sealant designed to seal and protect modern automotive paint finishes. It can be layered to build up additional gloss and protection, and can be topped with further coats of wax protection to give an even deeper shine if desired. Following easy application, 3M Performance Finish effectively adds a layer of armour to painted surfaces that stubbornly resists the British elements for two to three months at a time.

Specification

More Information
Adds Protection Yes
Application Method By hand only
Beading
6
Durability 2 months +
Enhances Gloss Yes
Flake Pop
8
Glossiness
4
Layerable Yes (allow 12 hours between coats)
Recommended For All paint types and colours
Reflectivity
8
Richness
4
Slickness
8
Trim-Safe No

How To Use

3M Performance Finish should be applied by hand. For best results, apply it to freshly polished paint using a Meguiar's Soft Foam Applicator Pad (try to avoid getting it on unpainted trims, but if you do be sure to wipe it off straight away, otherwise staining may occur). Only 2-3 pea-sized drops of product are required per panel, and these should be applied as thinly and evenly as possible to produce a film that should be buffed off immediately using a PB Deluxe Buffing Towel (there's no need to allow it to dry fully before it is removed; if you do you may find it more difficult to remove).

Reviews

Close Close