We Say

Bilt Hamber finis-wax is one of the most durable high-grade carnauba-based paste waxes currently available. It is very easy to apply and significantly more detergent-resistant than its rivals, which means it is virtually guaranteed to outlast any other wax under all conceivable conditions. In fact, Bilt Hamber are so proud of this wax that they offer a money back guarantee; as long as you use Bilt Hamber cleanser-fluid first (to prepare the finish) they will refund you the purchase price if it doesn't outlast your current best wax. Thus, if you're looking for a carnauba-based paste wax that imparts an insanely glossy-looking finish that lasts for upwards of six months per application, then Bilt Hamber finis-wax should definitely be on your shortlist. It's very impressive!

Key Features

Beading8/10(Compared To Others)

Durability6 Months +(Average Value)

Slickness8/10(Compared To Others)

Description

Bilt Hamber finis-wax is an incredibly durable carnauba-based wax, and is also designed to deliver a concours winning finish at a relatively modest price point. Unlike many paste waxes that contain a high concentration of carnauba, Bilt Hamber finis-wax does not rely on strong solvents or oils to make it spreadable. Rather, proprietary gloss enhancers are employed to do the same job, and these enable a harder, more durable wax-film to be laid down. So much so in fact, that Bilt Hamber finis-wax is far more detergent-resistant than most paste waxes, meaning it doesn't need to be applied nearly as often in order to maintain a high level of protection. It is very easy to apply and contains absolutely no abrasives, cleaners, colourants or perfumes, meaning that it can be layered successfully time and time again if you wish.

Specification

More Information
Adds Protection	Yes
Application Method	By hand only
Beading	8
Carnauba Content (By Volume)	Unspecified
Durability	6 months +
Enhances Gloss	Yes
Flake Pop	6
Glossiness	10
Layerable	Yes (allow 12 hours between coats)
Recommended For	All paint types and colours
Reflectivity	6
Richness	10
Slickness	8
Trim-Safe	No

How To Use

Bilt Hamber finis-wax should only be applied by hand. For best results, it should be applied to freshly cleansed paint two to three panels at a time and as thinly and evenly as possible using either the supplied applicator pad or a Meguiar's Soft Foam Applicator Pad. The resulting film should then be left to cure for a few minutes before being carefully buffed off using either the supplied buffing towel (250 ml version only) or a PB Deluxe Buffing Towel; there is no need to allow it to dry for any longer before it is removed (if you do, you will find it more difficult to remove).

We Say

Key Features

Description

Specification

How To Use

Reviews

We Say

Key Features

Description

Specification

How To Use

Bilt Hamber

Filters

Bilt Hamber finis-wax