Wolf's Chemicals Ultra Fine Polish (WP-1N)

No matter how good your sealant or wax is, you will not achieve a perfect looking paint finish unless you spend time polishing it properly first. And not just until you think it looks good either. You need to keep going, refining it further and further. If you do, something magical will happen: the clearcoat will end up looking like it’s sitting proud of the paint finish. Its glass-like depth and clarity will amaze you, and you will know perfection. If this is what you seek, Wolf's Chemicals Ultra Fine Polish and many hours of your time will get you there.

Wolf's Chemicals Ultra Fine Polish is an ultra-fine abrasive polish designed to maximise surface gloss. It works by using precision-milled aluminium oxide particles to burnish painted surfaces to perfection. Long lasting lubricants maximise its working time, making the jewelling process easy and enjoyable. The abrasives cut paint back at the finest scale imaginable, smoothing out micro-defects and creating the flattest possible finish. As a result, light plays over the paint more evenly, making it look as deep and reflective as physically possible.

You can use Wolf's Chemicals Ultra Fine Polish by hand or machine, although for best results we recommend the latter. By hand, apply Wolf's Chemicals Ultra Fine Polish with a Lake Country Light Cut Hand Pad. Only 1-2 pea-sized drops of product are required per 12” x 12” area. You should work it as firmly and evenly as possible until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a dual action polisher, apply Wolf's Chemicals Ultra Fine Polish with a Lake Country 140 mm Hydro-Tech Finishing Pad. Only 3-4 pea-sized drops of product are required per 18” x 18” area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a rotary polisher, apply Wolf's Chemicals Ultra Fine Polish with a Lake Country 140 mm Rotary H-T Finishing Pad. Only 1-2 pea-sized drops of product are required per 18” x 18” area. You should work it thoroughly at 1500-2000 revolutions per minute (speed 3-4 on most rotary polishers) using the zenith method until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.