Wolf's Chemicals Nano Sealing Polish (Shine & Seal)

We don’t often warm to all in one style products that promise to polish and protect paint in a single step, because they frequently fall into the trap of delivering too little cut and not enough protection. Instead, we recommend that polishing and protecting are performed as two distinct steps. However, if time is precious or multi-stage detailing doesn’t appeal to you, then Wolf’s Chemicals Nano Sealing Polish is worthy of your attention.

Why? Firstly, because it strikes a decent balance between cutting power and protection. It burnishes out wash marring and other minor blemishes with relative ease, and lays down sufficient protection to last up to three months at a time, even on daily drivers. Secondly, because it delivers a very slick finish characterised by excellent reflectivity and gloss, and, where present, plenty of flake pop. And the best bit? Tar struggles to stick to it. Which makes it very appealing indeed!

Wolf’s Chemicals Nano Sealing Polish is a creamy, solvent-based chemical nanotechnology coating that simultaneously enhances and protects the appearance of automotive paint. It uses precision-milled aluminium oxide particles and nano-scale chemicals to polish painted surfaces to perfection and lay down a thin layer of highly reflective, silica-based protection.

As a result of their treatment with Wolf’s Chemicals Nano Sealing Polish, painted surfaces become water hating (hydrophobic), which causes rainfall to bead up and roll off very quickly. This beading not only looks good, but also tends to wash away fresh surface contaminants, making routine care easier and safer as a result.

Wolf’s Chemicals Nano Sealing Polish offers up to three months of protection against the elements per application, but can be topped with Wolf’s Chemicals Nano Paint Sealant if greater durability is required. The glass-like coating also provides good protection against bird droppings, bug splatter, brake dust, road salt and harmful UV radiation from the sun.

You should apply Wolf’s Chemicals Nano Sealing Polish in a warm, dry place out of direct sunlight. It may be applied by hand or dual action machine, although for best results we recommend the latter. By hand, lightly wet a Meguiar’s Microfibre Applicator Pad with a few drops of the polish and work it into the paint thoroughly using moderate pressure. Allow the residue to dry for 15 minutes before buffing it off using a PB Super Buffing Towel. Leave the finish to cure for a further 12 hours before getting it wet or applying Wolf’s Chemicals Nano Paint Sealant, if desired.

For best results using a dual action polisher, apply Wolf's Chemicals Nano Sealing Polish with a Lake Country 140 mm Constant Pressure Glazing Pad. Only 3-4 pea-sized drops of product are required per 18” x 18” area. After spreading, work it thoroughly at 3000-4000 orbits per minute (speed 3-4 on most dual action machine polishers). Allow the residue to dry for 15 minutes before buffing it off using a PB Super Buffing Towel. Leave the finish to cure for a further 12 hours before getting it wet or applying Wolf’s Chemicals Nano Paint Sealant, if desired.