Wolf's Chemicals Medium Cut Polish (WP-3N)

Wolf's Chemicals Medium Cut Polish neatly bridges the gap between coarse finishing polishes and light cutting compounds in terms of its cut and gloss characteristics. This makes it a highly versatile polish and ideal for use in situations where a moderate amount of correction is required without a subsequent refining step. In this respect, it is a great time saver, and therefore comes into its own for one step enhancement style details, where full correction isn’t necessarily required but a great standard of finish is. Wolf's Chemicals Medium Cut Polish is suitable for all paint types, and its filler-free formula also means that what you see is what you get.

Wolf's Chemicals Medium Cut Polish is a medium-grade abrasive polish designed to remove minor swirl marks and heavy wash marring. It sits squarely between ultra-fine finishing polishes and light cutting compounds in terms of its cut and gloss, making it ideal for enhancement details in which a reasonable level of correction and good finishing must be achieved in a single step. It works by using precision-milled aluminium oxide particles to burnish painted surfaces to perfection. Long lasting lubricants maximise its working time, while its filler-free formula ensures that defect removal is permanent rather than temporary.

You can use Wolf's Chemicals Medium Cut Polish by hand or machine, although for best results we recommend the latter. By hand, apply Wolf's Chemicals Medium Cut Polish with a Lake Country Light Cut Hand Pad. Only 1-2 pea-sized drops of product are required per 12” x 12” area. You should work it as firmly and evenly as possible until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a dual action polisher, apply Wolf's Chemicals Medium Cut Polish with a Lake Country 140 mm Hydro-Tech Polishing Pad. Only 3-4 pea-sized drops of product are required per 18” x 18” area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.

For best results using a rotary polisher, apply Wolf's Chemicals Fine Cut Polish with a Lake Country 140 mm Rotary H-T Polishing Pad. Only 1-2 pea-sized drops of product are required per 18” x 18” area. You should work it thoroughly at 1500-2000 revolutions per minute (speed 3-4 on most rotary polishers) using the zenith method until only an oily film remains. Buff off the film carefully using a PB Super Buffing Towel.