This specialist Swissvax kit provides you with everything you need to prepare and protect matt paint finishes and vinyl wraps properly, without any risk of damaging the delicate matt effect. Swissvax Car Bath Opaque is a premium shampoo concentrate designed specifically for washing matt paint finishes and matt vinyl wraps. Swissvax Pre-Cleaner Opaque is a non-abrasive pre-wax cleaner that will prepare your matt finish perfectly in readiness for Swissvax wax protection. Swissvax Opaque is a premium wax (40% pure Brazilian No.1 carnauba by volume) designed specifically for matt paint finishes and matt vinyl wraps; it delivers long lasting protection and enhanced water repellency without degrading the underlying matt effect. Swissvax Quick Finish Opaque is a perfect quick detailer for maintaining your matt finish after routine washing and drying. In summary, this kit is essential for the safe and effective care of matt effect finishes, and comes highly recommended.
Step 1 - Swissvax Car Bath Opaque
For best results, use at a dilution rate of 2000:1 (water:product), which equates to 10 ml (one capful) in a Swissvax Smart Bucket (the supplied bottle contains enough shampoo for approximately 25 washes). Simply add the correct amount of shampoo to your bucket and then fill rapidly to the top with warm tap water. If your water pressure is low and relatively few suds are produced, blast some cold water into the bucket with your hose – this will quickly generate more suds.
Step 2 - Swissvax Pre-Cleaner Opaque
For best results, lightly mist Swissvax Pre-Cleaner Opaque over a single panel at a time, and immediately wipe the panel down to spread a thin, even film of product using one of the supplied Swissvax Micro Absorb Towels. Then refold the towel, and wipe the panel down again to fully remove the film and reveal a perfectly clean finish.
Step 3 - Swissvax Opaque
Swissvax Opaque should be applied as thinly and evenly as possible using the supplied Swissvax Wax Applicator. The resulting film should then be buffed off within a few minutes of application using the supplied Swissvax Micro Polish Towel; there is absolutely no need to allow the film to dry fully before it is removed (if you do, you may find that it becomes more difficult to remove).
Step 4 - Swissvax Quick Finish Opaque
For best results, lightly mist Swissvax Quick Finish Opaque over a single panel at a time and immediately wipe the panel down to spread a thin, even film of product using one of the supplied Swissvax Micro Absorb Towels. Then refold the towel and buff the panel down carefully to fully remove the film and leave a perfect smear-free finish.
Care instructions for applicators and towels
(i) wash after each use in a washing machine at a low temperature (40 °C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners); (ii) allow to dry naturally on a line or tumble dry on a cool heat setting (avoid radiators and other sources of high heat), and; (iii) store in a dry, dust-free environment whilst not in use (lidded plastic storage boxes are ideal in this respect).
Due to the complexity of this kit we are unable to provide a meaningful summary specification. Please see the product pages linked in the ‘Description’ tab for individual product specifications.