Swissvax Entry Collection Kits
Please note that due to an international trademarking issue, we can only ship kits containing Swissvax Best of Show to UK destinations at the current time. Orders received from international destinations will be cancelled and refunded in full. Our apologies for any inconvenience this may cause.
This kit comprises...
1 x Swissvax Car Bath (250 ml)
1 x Swissvax Cleaner Fluid Regular (250 ml)
1 x Swissvax Cleaner Fluid Pad
1 x Swissvax Micro Polish Towel
2 x Swissvax Micro Fluffy Towels
...and comes supplied in a small Swissvax Cooler Bag, along with a hard copy of the Swissvax Handbook and one of the wax options shown below.
Please note that due to an international trademarking issue, we can only ship kits containing Swissvax Best of Show to UK destinations at the current time. Orders received from international destinations will be cancelled and refunded in full. Our apologies for any inconvenience this may cause.
For best results, use at a dilution rate of 2000:1 (water:product), which equates to 10 ml (one capful) in a Swissvax Smart Bucket (each bottle contains enough shampoo for approximately 25 washes). Simply add the correct amount of shampoo to your bucket and then fill rapidly to the top with warm tap water. If your water pressure is low and relatively few suds are produced, blast some cold water into the bucket with your hose – this will quickly generate more suds.
Step 2 - Swissvax Cleaner Fluid Regular
Swissvax Cleaner Fluid Regular should only be applied by hand. For best results, it should be applied to freshly clayed paint one panel at a time using a Swissvax Cleaner Fluid Pad. Only 3-4 pea-sized drops of product are required per panel, and these should be worked in as thinly and evenly as possible using light downward pressure. The resulting film should be buffed off immediately using either a Swissvax Micro Absorb Towel or a Swissvax Micro Polish Towel.
Step 3 - Your choice of Swissvax wax
Your choice of Swissvax wax should only be applied by hand. For best results, it should be applied to freshly cleansed paint three to four panels at a time and as thinly and evenly as possible using a Swissvax Wax Applicator. The resulting film should then be buffed off within a few minutes of application using either a Swissvax Micro Absorb Towel or a Swissvax Micro Polish Towel; there is absolutely no need to allow the film to dry fully before it is removed (if you do, you will find that is more difficult to remove).
Step 4 - Swissvax Pneu
For best results, tyres to be treated with Swissvax Pneu must be spotlessly clean and completely dry before use. Only 2-3 mists of product are required per tyre, and these should be applied to the face of a Swissvax Wax Applicator and then wiped into the tyre surface as thinly and evenly as possible; you will be amazed at how far you can stretch the resulting film around the tyre without the need to add any more product. Once applied, leave to dry fully for 30 minutes before driving. If this is not possible, wipe each tyre down gently with a Swissvax towel immediately before driving in order to eliminate the risk of sling.
Care instructions for applicators and towels
(i) wash after each use in a washing machine at a low temperature (40 °C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners); (ii) allow to dry naturally on a line or tumble dry on a cool heat setting (avoid radiators and other sources of high heat), and; (iii) store in a dry, dust-free environment whilst not in use (lidded plastic storage boxes are ideal in this respect).
Please note that due to an international trademarking issue, we can only ship kits containing Swissvax Best of Show to UK destinations at the current time. Orders received from international destinations will be cancelled and refunded in full. Our apologies for any inconvenience this may cause.
























