Swissvax Car Bath Opaque is a modified version of Swissvax Car Bath, the thickest, most luxurious car shampoo we offer, and is designed specifically for use on matt paint finishes and matt effect vinyl wraps. Highly lubricated and very sudsy, it feels super slick in use and allows your Swissvax Waschpudel to glide effortlessly over underlying surfaces as you wash your car. It is absolutely the best choice for washing and maintaining matt finishes protected with Swissvax Opaque; normal car shampoos should be avoided, as the oils that they contain can permanently degrade such finishes. Although the relatively high purchase price may be initially off-putting to some, the massive dilution ratio means that this shampoo concentrate is actually just as cost effective as some of our lower priced shampoos. Worth bearing in mind!
Conventional shampoos should not be used on matt paint finishes and matt vinyl wraps, as they contain gloss enhancing oils that can permanently degrade the matt effect. Soft as natural rainwater, Swissvax Car Bath Opaque is a highly effective yet equally gentle shampoo concentrate that makes up to 500 litres of wash solution per bottle. It effectively breaks the bond between grime and underlying surfaces, allowing you to effortlessly wash your vehicle in minimal time with no fear of damaging matt effect finishes. Use in conjunction with a pair of Swissvax Smart Buckets and a Swissvax Waschpudel for best results.
For best results, use at a dilution rate of 2000:1 (water:product), which equates to 10 ml (one capful) in a Swissvax Smart Bucket (each 250 ml bottle contains enough shampoo for approximately 25 washes, while each 470 ml bottle contains enough shampoo for approximately 47 washes). Simply add the correct amount of shampoo to your suds bucket and then fill it to the top with a stream of warm water, stirring it as you do so. If your water pressure is low and relatively few suds are produced, blast a little cold water into the bucket with your hose or pressure washer (making sure that you submerge the nozzle first); this will generate more suds.
|Strips sealants and waxes:|
|Number of washes per bottle:||25 (250 ml) or 47 (470 ml)|
|Recommended dilution ratio:||2000:1 (water:product)|