No matter how good your sealant or wax is, you will not achieve a perfect looking paint finish unless you spend time polishing it properly first. And not just until you think it looks good enough either. You need to dedicate yourself to the cause and keep going, refining it further and further and further. If you do, something magical will happen: the clearcoat will end up looking thicker, and almost like it's sitting proud of the paint finish. Its glass-like depth and clarity will amaze you, and you will know perfection. If this is what you seek, SCHOLL Concepts S40 will get you there.
SCHOLL Concepts S40 is an ultra-fine abrasive polish designed to maximise surface gloss on all paint types. It works by using intelligent Powder Technology (iPT) abrasives to burnish painted surfaces to perfection, smoothing out micro-defects and creating the flattest possible finish. As a result, light plays over the paint more evenly, making it look as deep and glossy as physically possible. Long-lasting lubricants maximise its working time, making the jewelling process easy and enjoyable, while its filler-free formula ensures that defect removal is permanent rather than temporary.
You can use SCHOLL Concepts S40 by hand or machine, although for best results we recommend the latter. By hand, apply SCHOLL Concepts S40 with a SCHOLL Concepts Polishing Puck. Only 3-4 pea-sized drops of product are required per 12" x 12" area. You should work it as firmly and evenly as possible until only a thin residue remains. Buff off the residue carefully using a PB Super Buffing Towel.
For best results using a dual action polisher, you should work SCHOLL Concepts S40 with either a SCHOLL Concepts 135 mm Spider Finishing Pad or a SCHOLL Concepts 135 mm Premium Finishing Pad. Once the pad is well primed, only 3-4 pea-sized drops of product are required per 18" x 18" area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers), applying moderate pressure for the first 90 seconds or so, and then progressively lighter pressure for a further 90 seconds. Once done, buff off the final residue carefully using a PB Super Buffing Towel.
|Suitable for hand use:|
|Suitable for dual action polishers:|
|Suitable for rotary polishers:|
|Suitable for soft paints:|
|Suitable for intermediate paints:|
|Suitable for hard paints:|
|Contains abrasive particles:|
|Diminishing type abrasives:|
|Contains chemical cleaners:|
|Contains fillers and glazing oils:|