SCHOLL Concepts S3 Gold XXL is the 800 lb gorilla in the world of car polishes. Q: What kind of paint defects will it remove? A: Any that you dare show it! It's packed to the rafters with diamond-hard aluminium-oxide diminishing abrasives, which cut ferociously to begin with, meaning that you'll correct even very severe defects in no time at all. However, these abrasives then break down quickly to form a polishing rouge that actually begins to refine the finish. Consequently, it's often possible to correct and refine intermediate and hard paints in a single step, particularly when using long-throw dual action polishers. That said, in cases where time is not pressing, following up with an ultra-fine finishing polish such as SCHOLL Concepts S30+ or SCHOLL Concepts S40 will improve the finish further.
SCHOLL Concepts S3 Gold XXL is an aggressive cutting compound designed for intensive correction work on modern ceramic nano-particle and scratch-resistant clearcoats (it also produces great results on harder conventional paint finishes too). SCHOLL Concepts S3 Gold XXL uses intelligent Powder Technology (iPT) abrasives that break down quickly in use to form a progressively finer polishing residue. As a result, the level of cut on offer diminishes quickly from that of a cutting compound to that of a finishing polish, meaning that it's often possible to correct and refine the finish in a single step. To aid this process, SCHOLL Concepts S3 Gold XXL features advanced lubricants that maximise its efficiency, while its filler-free formula ensures that defect removal is permanent rather than temporary.
SCHOLL Concepts S3 Gold XXL works best by machine; hand use is not recommended. For best results using a dual action polisher, work it with a SCHOLL Concepts 140 mm Sandwich Spider Pad. Once the pad is well primed, only 3-4 pea-sized drops of product are required per 18" x 18" area. After spreading, work it thoroughly at 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers), applying moderate pressure for the first 90 seconds or so, and then progressively lighter pressure for a further 90 seconds or so. Once done, buff off the final residue carefully using a PB Super Buffing Towel.
|Suitable for hand use:|
|Suitable for dual action polishers:|
|Suitable for rotary polishers:|
|Suitable for soft paints:|
|Suitable for intermediate paints:|
|Suitable for hard paints:|
|Contains abrasive particles:|
|Diminishing type abrasives:|
|Contains chemical cleaners:|
|Contains fillers and glazing oils:|