Raceglaze Signature Series Pre-Wax Cut & Cleanse

Raceglaze Signature Series Pre-Wax Cut & Cleanse is a combined finishing polish and chemical paint cleaner that is designed to strip away deep-seated grime and permanently remove minor paint defects such as holograms and fine swirl marks from original and refinished paintwork to leave a superior high gloss finish ready for the addition of carnauba wax protection. Comprising a unique blend of ultra-fine precision-milled diminishing abrasives and chemical cleaning agents, Raceglaze Signature Series Pre-Wax Cut & Cleanse offers distinct advantages in terms of finish quality and work time, and performs equally well by hand or dual action machine, making it ideal for both home and professional users alike.

Raceglaze Signature Series Pre-Wax Cut & Cleanse is designed to permanently remove minor paint defects such as such as faint swirl marks, polishing holograms and wash marring from original and refinished paintwork and leave a superior high gloss finish ready for the addition of sealant or wax protection. When used after compounding, Raceglaze Signature Series Pre-Wax Cut & Cleanse will completely remove any traces of hologramming and leave paint perfectly primed for a high quality carnauba wax application. Unlike many other polishes, this product contains no fillers of any kind, meaning that defect removal is permanent rather than temporary.

Raceglaze Signature Series Pre-Wax Cut & Cleanse can be applied by hand or dual action machine with equally good results. By hand, it should be applied to freshly clayed or compounded paint using a Lake Country Light Cut Hand Pad. Only 1-2 pea-sized drops of product are required to polish a 12” x 12” area, and these should be worked in as firmly and evenly as possible until only a thin haze remains. This haze should then be buffed off carefully using a PB Super Buffing Towel.

For best results using a dual action polisher, Raceglaze Signature Series Pre-Wax Cut & Cleanse should be applied to freshly clayed or compounded paint using a Lake Country 140 mm Hydro-Tech Finishing Pad. Only 3-4 pea-sized drops of product are required per 18” x 18” area, and these should be worked in thoroughly at around 4000-5000 orbits per minute (speed 4-5 on most dual action machine polishers) until only a thin film remains. This film should then be buffed off carefully using a PB Super Buffing Towel.