Raceglaze Signature Series Pre-Wax Cleaner is without any doubt one of the best pre-wax cleaners on the market today, and is, in our opinion, very closely tied for the top spot with BLACKFIRE Paint Cleaner. We use Raceglaze Signature Series Pre-Wax Cleaner on a regular basis in our studio during one day protection details, in order to mask fine paint defects and massively enhance gloss ahead of applying premium carnauba wax protection. Customers bringing their cars into us for this service frequently ask us how we make their paint look so fantastic without resorting to any kind of corrective polishing; now you know the answer! In short, Raceglaze Signature Series Pre-Wax Cleaner is an excellent product that effortlessly transforms the look of paint in no time at all, which makes it ideal for enthusiasts and professionals alike.
Raceglaze Signature Series Pre-Wax Cleaner is a non-abrasive combined chemical polish and glaze that does away with the need for separate final polishing and glazing steps. It is designed to mask minor paint defects (such as wash marring and fine swirl marks) and dramatically enhance gloss in order to create the illusion that paint is dripping wet ahead of an application of premium wax protection. During the application process, advanced chemical cleaning agents strip away any residual grime and old layers of sealant or wax protection, while kaolin clay particles and glazing oils visually reduce the extent of wash marring and minor swirl marks by filling such defects and robbing sunlight of sharp edges off of which to reflect.
Raceglaze Signature Series Pre-Wax Cleaner can be applied equally well by hand or dual action machine. For best results by hand, it should be applied to freshly clayed paint using a Meguiar's Even Coat Microfiber Applicator Pad. Only 3-4 pea-sized drops of product are required per panel, and these should be wiped in as thinly and evenly as possible to produce a film that should then be allowed to dry for up to 15 minutes. Once hazed over, this film should then be buffed off carefully using a PB Super Buffing Towel.
For best results using a dual action polisher, Raceglaze Signature Series Pre-Wax Cleaner should be applied to freshly clayed paint using a Lake Country 140 mm Hydro-Tech Finishing Pad. Only 3-4 pea-sized drops of product are required per panel, and these should be worked in thoroughly at around 3000-4000 orbits per minute (speed 3-4 on most dual action machine polishers) until only a thin film remains. After being allowed to haze over for up to 15 minutes, this film should then be buffed off carefully using a PB Super Buffing Towel.
|Suitable for hand use:|
|Suitable for dual action polishers:|
|Suitable for rotary polishers:|
|Contains abrasive particles:|
|Contains chemical cleaners:|
|Contains fillers and glazing oils:|