
Poorboy's Light Glaze & Wax Kit
This kit comprises...
1 x Poorboy's White Diamond Glaze (473 ml)
1 x Poorboy's Natty's White Paste Wax (227 g)
1 x Poorboy's Quick Detailer Plus (473 ml)
1 x Meguiar's Even Coat Microfiber Applicator Pad
1 x Meguiar's Soft Foam Applicator Pad
...and offers a 10% saving compared to buying the contents separately.
Poorboy's White Diamond Glaze should be applied to freshly clayed paint using the supplied Meguiar's Even Coat Microfiber Applicator Pad. Only 3-4 pea-sized drops of product are required per panel and these should be wiped in as thinly and evenly as possible to produce a film that should then be allowed to dry for up to 15 minutes. Once hazed over, this film should then be buffed off carefully using the supplied PB Super Buffing Towel.
Step 2 – Poorboy's Natty's White Paste Wax
Poorboy's Natty's White Paste Wax should be applied as thinly and evenly as possible using the supplied Meguiar's Soft Foam Applicator Pad. The resulting film should be left to cure for between 5-10 minutes and then buffed off carefully using the supplied PB Deluxe Buffing Towel.
Step 3 – Poorboy's Quick Detailer Plus
Lightly mist Poorboy's Quick Detailer Plus over a single panel at a time and immediately wipe the panel down to spread a thin, even film of product using the supplied PB Luxury Buffing Towel. Then refold your towel and buff the panel down carefully to fully remove the film and reveal an intense streak-free shine.
Care instructions for applicators and towels
(i) wash after each use in a washing machine at a low temperature (40°C) using a non-biological liquid detergent (avoid soap powders and detergents containing bleach or fabric softeners); (ii) allow to dry naturally on a line or tumble dry on a cool heat setting (avoid radiators and other sources of high heat), and; (iii) store in a dry, dust-free environment while not in use (lidded plastic storage boxes are ideal in this respect).

