GYEON Q2M CURE MATTE is an easy to use hydrophobic spray sealant that banishes the usual problems associated with trying to maintain a matt-specific quartz coating, i.e. shampoo compatibility and water spotting. It does this by laying down a slick layer of SiO2-fortified polymers, which seals off the underlying coating against waterborne minerals and enhances its appearance. GYEON Q2M CURE MATTE can be applied to wet or dry surfaces equally well, and the incremental addition of these SiO2-fortified polymers over time not only makes routine washing and drying even easier, but also prolongs the life of the underlying quartz coating almost indefinitely.
GYEON Q2M CURE MATTE is the ultimate maintenance product for matt-specific quartz coatings, and is designed to be applied to wet or dry surfaces straight after routine washing. By depositing a slick layer of SiO2-rich polymers, GYEON Q2M CURE MATTE enhances hydrophobicity and imparts strong anti-static properties. In addition, it also reduces the mineral affinity of freshly applied quartz coatings and thus eliminates the risk of water spots forming and etching into treated surfaces. Each application of GYEON Q2M CURE MATTE has a surprisingly long lifespan of up two months, meaning it can also be used to add temporary protection to unsealed finishes.
For best results, pat dry your car first with a suitable microfibre drying towel. Next, lightly mist GYEON Q2M CURE MATTE over a single panel at a time and immediately wipe the panel down to spread a thin, even film of product using a PB Luxury Buffing Towel. Then refold your towel and buff the panel down carefully to fully remove the film and reveal a uniform, streak-free finish. Alternatively, you may wish to mist a Meguiar’s Microfibre Applicator Pad with GYEON Q2M CURE MATTE and then use this to spread it thinly and evenly over each panel before buffing it off with a PB Luxury Buffing Towel. This latter method ensures thinner and more even coverage.
|Suitable as a clay lubricant:|